In preparation for a bunch of wrenching- Corsa LTH's and mid pipes

[HKusp]

I bought a good used set of inch &7/8's LTH's and mid pipes and it is looking like next weekend we are going to take it to a buddy's shop and tackle them. I already bought this kit from Ford with all the needed bolts, gaskets etc.

https://accessories.ford.com/products/2011-2020-5-0l-coyote-exhaust-manifold-gasket-and-hardware-kit

But I am pretty certain we are going to need some O2 extensions. Any suggestions from those in the know?

Sponsored

 

[PC_GUARD]

Don't use extensions. Buy f150 FORWARD 02's. Get what you need at rock auto

 

[HKusp]

Ugh...no one answered me, so I reached out to Beefcake earlier and I just bought the BBK extensions they recommended.

 

[K4fxd]

Make sure you fill the plugs with dielectric grease.

 

[Orly6]

Would anyone just so happen to have a part number for the F150 O2 sensors & if so are they longer? The car has long tube headers. I currently have extensions & seem to have issues with the AFRs fluctuating a lot. Before AFR’s seemed to be alot more consistent.

 

[PC_GUARD]

Would anyone just so happen to have a part number for the F150 O2 sensors & if so are they longer? The car has long tube headers. I currently have extensions & seem to have issues with the AFRs fluctuating a lot. Before AFR’s seemed to be alot more consistent.

Left upstream NTK 27063
Right upstream NTK 27018


Both are under $40 at rock auto

 

[Orly6]

Left upstream NTK 27063
Right upstream NTK 27018


Both are under $40 at rock auto

I actually ordered 2 NTK 27079’s? These were 100$ each at Oreilys. Would they still be the same or similar? If not I might have to call them & get the right ones ordered.

 

[HKusp]

Left upstream NTK 27063
Right upstream NTK 27018


Both are under $40 at rock auto

Just ordered them, thanks very much.

 

[Orly6]

So I believe the part # you have for the right & left upstream are for gen 2 style connections. I have a 2020 Mustang Gt so the connections differ. I don’t believe those will work on the car.

 

[PC_GUARD]

I actually ordered 2 NTK 27079’s? These were 100$ each at Oreilys. Would they still be the same or similar? If not I might have to call them & get the right ones ordered.

Idk I used the drop down on rock auto....

When I did mine I was an idiot and bought the rears, not thinking how this car is different than new edge, until i got looking at it... So this topic has stood out in my mind lol


Btw RA usually gets me stuff in NWFL in 3 days or less.

 

[PC_GUARD]

So I believe the part # you have for the right & left upstream are for gen 2 style connections. I have a 2020 Mustang Gt so the connections differ. I don’t believe those will work on the car.

Ohhh Yeah sorry about that

27080
27079

Appear to be the ones for the gen 3. Gen 3 yote are more expensive and on RA site they dont have NTK for both sides...

https://www.rockauto.com/en/catalog...46,exhaust+&+emission,oxygen+(o2)+sensor,5132

Sponsored