GTP
Deutsche Pony
- Joined
- May 27, 2015
- Threads
- 197
- Messages
- 4,429
- Reaction score
- 2,288
- Location
- Indy
- Website
- www.BambergAudio.com
- First Name
- Philip
- Vehicle(s)
- 2019 GT PP1 A10 Outrageous Orange HPDE mods
- Thread starter
- #1
TLDR takeaways:
After much testing and experimenting, I improved the sound of the B&O system just by adjusting the controls.
Here is the final result:
Even after setting the subwoofer tone control to minimum, and the midrange control up by 4 clicks and the treble up by +5 or +6, the subwoofer level is still too hot by around 6dB.
Here are the settings (the balance is set for driver with no passenger):
The OmniMic was placed into passenger headrest:
I will post supporting data that lead me to this alignment next.
- The factory set the level of the B&O subwoofer way too high by at least 12dB.
- The tonal balance can be adjusted close to flat with somewhat extreme settings of the 3 tone controls.
- Imaging is better with the balance 1 click shy of centered on the passenger seat centerline. (For when there is no passenger, and assuming center channel speaker is OFF.)
After much testing and experimenting, I improved the sound of the B&O system just by adjusting the controls.
Here is the final result:
Even after setting the subwoofer tone control to minimum, and the midrange control up by 4 clicks and the treble up by +5 or +6, the subwoofer level is still too hot by around 6dB.
Here are the settings (the balance is set for driver with no passenger):
The OmniMic was placed into passenger headrest:
I will post supporting data that lead me to this alignment next.
Sponsored
Last edited: