How do you make your GT350 stand out?

[GP2017GT]

Forgeline Wheels and an a thick ass Fathouse intercooler make it stand out!

Me like

Sponsored

 

[460Fred]

Forgeline Wheels and an a thick ass Fathouse intercooler make it stand out!

In my best Austin Powers voice, that’s dead sexy baby!

 

[footnfan]

Yes, that's it! And dont forget the fake R badges, knockoff wing, and a Facebook splitter. Oh, and a set of 6G knockoff R style wheels.
[/QUOTE

I bought Project 6GR R-SPEC 7-SEVEN 19x11 / 19x11.5 -Project 6GR R-SPEC 7-SEVEN 19x11 / 19x11.5 R replica wheels and took my carbon fiber wheels off. I struggled to find lug nuts, Project 6 sent me 20 tiny lugs that made all the studs stick out, I also purchased a set ZL1 addons Titanium lugs, which disappear on the fronts ( studs sticking out about 2 inches, and on the rears, the lug nuts stick out. I really need two different length lug nuts. Long for front, shorter for rear. What did you use?? Thanks. I can post pics if that helps.

 

[Rapid Red]

They actually already do.....
To enhance it pulling the front wheels off the ground, leaving red lights could work.

 

[Riverss26]

This is what I did. GT4 center vent with hood locks

 

[Riverss26]

Very cool! I live up North so this sounds like a great winter project. Did you have to start with a completely new hood? The position of the vent does not see in line with the original GT350 hood vent/duct. Maybe I am mistaken but I am curious. Actually the more I look it is the original I think?

 

[1evl_gt350]

New gt4 carbon fiber hood

 

[Rob-17GT350]

New gt4 carbon fiber hood

Not sure what your ultimate plans are but I think it would look really cool to leave the carbon fiber exposed but add the red with black accent stripes!

 

[Rimox51]

Try a unique hood black out and no stripes. Everyone has stripes.

 

[V8 Voodoo]

Here are a few things I've done with my 2018. Pretty pleased, so far. Michael

Did you take your seats somewhere to have this done or did you buy a skin and do it yourself?

 

[72&18]

Hey, I have an '18 OF and purchased the Shelby splitter lettering and snake emblem overlays for the front, back and dash from this company out of Canada:

https://zimcraft.ca/

I also did the stripe for the steering wheel, all in OF. I get many compliments on them. I am not trying to make it a R with red backgrounds, but just to make the badges stand out. I also put the GT500 / 18+ GT taillights. I like how they are shaped vs. the straight up and down ones that come stock on our 350's.

I also replaced the stock lug nuts with Gorilla black lugs.

 

[mech94]

New gt4 carbon fiber hood

who makes this hood and how much does it weight

 

[1evl_gt350]

who makes this hood and how much does it weight

Trufiber.

 

[mech94]

Trufiber.

looked on their website can't find it what's the cost on it

 

[1evl_gt350]

looked on their website can't find it what's the cost on it

$2900 or so.

Sponsored