HELP Wheel Pros! 19x10.5 offset 30mm on a GT front wheel ???? Tire Sizes for 19"? ? ? ?

Discussion in 'Wheels & Tires' started by socal2fast, Aug 7, 2018.

  1. socal2fast

    socal2fast Well-Known Member

    Vehicle(s):
    Mustang
    Joined:
    Sep 21, 2016
    Location:
    So.Cal.
    Posts:
    368
    Likes Received:
    122
    0   0   0
    Hi Guys

    Can you help with some great info first if the set up will work? If so tire sizes?

    I have a friend looking at 19" wheels for his new mustang. He found some for the Shelby but only come in this size? Will they sit sit flush and not poke?

    19x10.5" ET30

    Can you run 40 series tires on 19" if he went 19x10.5 front and 19x11 Rear? If so what sizes?

    On my car I'm running 20" 275/35/20 front and 315/35/20 rear and they work great. I don't know much about 19" set ups.
     
  2. ApexRaceParts

    ApexRaceParts Well-Known Member
    Gold Sponsor


    Vehicle(s):
    Mustang
    Joined:
    Dec 27, 2016
    Location:
    Bay Area
    Posts:
    640
    Likes Received:
    235
    0   0   0
    By Shelby, I assume you're referring to a GT350? If so, that wheel will fit up front nicely, but poke noticeably in the rear by around half an inch.

    - Cory
     
  3. OP
    OP
    socal2fast

    socal2fast Well-Known Member

    Vehicle(s):
    Mustang
    Joined:
    Sep 21, 2016
    Location:
    So.Cal.
    Posts:
    368
    Likes Received:
    122
    0   0   0
    The rear are 19x11 ET 62 and should sit flush with the gt350 brake kit. I have 20x11 ET 57 on mine with gt350 brakes and is nice and flush.

    It’s the Front that I’m very concerned or have poke at the 19x10.5” et30?
     
  4. ApexRaceParts

    ApexRaceParts Well-Known Member
    Gold Sponsor


    Vehicle(s):
    Mustang
    Joined:
    Dec 27, 2016
    Location:
    Bay Area
    Posts:
    640
    Likes Received:
    235
    0   0   0
    Ah, I see now. I was under the impression that it was going to be 19x10.5" ET30 all around. 19x11" ET62 will fit fine in the rear, definitely not going to poke. If anything it would look better with a small spacer in the back, 5mm or so. Our 19x11" ET52 fits fantastic in the rear of the S550.
     
  5. Paul@PKAUTODESIGN

    [email protected] The Wheel guy
    Diamond Sponsor


    First Name:
    Paul A.
    Vehicle(s):
    2016 Shelby GT350 Tech Pack #G5531 Avalanche Grey
    Joined:
    Oct 26, 2016
    Location:
    Los Angeles, California
    Posts:
    12,882
    Likes Received:
    2,165
    Rating:
    100%
    8   0   0
    They do fit the front and you can use a 285/35/19 295/35/19 or 305/30/19
     
  6. OP
    OP
    socal2fast

    socal2fast Well-Known Member

    Vehicle(s):
    Mustang
    Joined:
    Sep 21, 2016
    Location:
    So.Cal.
    Posts:
    368
    Likes Received:
    122
    0   0   0
    Hey Paul

    Will 19x10.5 30ET sit flush with no poke in the front?
     
  7. Paul@PKAUTODESIGN

    [email protected] The Wheel guy
    Diamond Sponsor


    First Name:
    Paul A.
    Vehicle(s):
    2016 Shelby GT350 Tech Pack #G5531 Avalanche Grey
    Joined:
    Oct 26, 2016
    Location:
    Los Angeles, California
    Posts:
    12,882
    Likes Received:
    2,165
    Rating:
    100%
    8   0   0
    I have done it before it fits flush sir.
     
Loading...

Share This Page