Has anyone attempted to swap a 10-speed GT’s Coyote for a Voodoo?

[bauern]

In fairness mine has been able to do more than most as they have a “performance” line .
He was able to do a 6r80 swap and they have done most of my other work for the last 10 years .

I am sure he could do the “re-pinning “ of the ECU if he had instructions .

Technically it's re pinning the engine harness. Only cyl. 2,3,6, & 7 need to be changed
Here you go:

Sponsored

 

[olaosunt]

Technically it's re pinning the engine harness. Only cyl. 2,3,6, & 7 need to be changed
Here you go:

As always , you are the man... thanks !!
I was not sure if it was you or @AceOne who had put a CP motor in their GT350.

I already have a spare voodoo engine(and another in the way ) but this means I have another option if I need to for the GT 350.

Also means I have the option to put one of the voodoo motors in one of the 15 GT’s if I chose .

 

[olaosunt]

Technically it's re pinning the engine harness. Only cyl. 2,3,6, & 7 need to be changed
Here you go:

reviving this thread as I plan my Voodoo/whipple /TH400 Fox body .swap .
Fat house has the engine /transmission combo in their record setting GT 350 but they run a Motec ECU .
https://www.mustang6g.com/forums/threads/worlds-quickest-fastest-gt350-1-4-mile-7-58-187-mph.167061/

It looks like I will be able to use the Coyote Manual control pack with the Voodoo engine harness and a custom tune ....

Sponsored