- Joined
- Mar 10, 2020
- Threads
- 45
- Messages
- 2,854
- Reaction score
- 90
- Location
- Los Angeles CA
- Website
- motorsportsla.com
- Vehicle(s)
- Shelby GT350
- Thread starter
- #1
Hello members,
We had a request for this wheel to be made for a 2020 Shelby GT500.
Its going to be a direct bold on with all factory specs and load rating will be high for track use.
The forgings that will be used are especially made to clear the massive calipers on the GT500.
Just want to share the design and we will be posting pictures and weights once the first set is done which should be in about 4-6 weeks.
The fitment will be the same as OEM 20x11 Front & 20x11.5 Rear with the option to use your OEM Center Caps, OM Tires, and OEM Lug Nuts.
We had a request for this wheel to be made for a 2020 Shelby GT500.
Its going to be a direct bold on with all factory specs and load rating will be high for track use.
The forgings that will be used are especially made to clear the massive calipers on the GT500.
Just want to share the design and we will be posting pictures and weights once the first set is done which should be in about 4-6 weeks.
The fitment will be the same as OEM 20x11 Front & 20x11.5 Rear with the option to use your OEM Center Caps, OM Tires, and OEM Lug Nuts.
Sponsored