Edelbrock Tech
Well-Known Member
- Thread starter
- #16
We will offer a "tuner kit" that can be used on a GT350. This will require custom tuning.So will there be a kit for the GT350 ?
Sponsored
We will offer a "tuner kit" that can be used on a GT350. This will require custom tuning.So will there be a kit for the GT350 ?
We are currently ramping up production on this new inlet. 2018-2019 modular inlet Stage 1 superchargers will be available in about one month. I will post up everything you want to know about those kits next week!So I have checked the Edelbrock website, nothing has been announced on a base kit for the 18-19 Mustang GT, do you happen to have any information
Our focus is on 2015-2019 GT at this time. Results from that testing suggest that even greater gains are possible on the 5.2L.so have you guys done any testing on gt350s yet?
sent you a pm.Our focus is on 2015-2019 GT at this time. Results from that testing suggest that even greater gains are possible on the 5.2L.
Soooo when will this info be available ? Nothing on the website cept the fact you have a GT350 section with nothing that the GT350 actually uses..We will offer a "tuner kit" that can be used on a GT350. This will require custom tuning.
The kit is in development still. You will see more info on this in the coming weeks. all I can say is dat torqueeeeeee thooooo.Soooo when will this info be available ? Nothing on the website cept the fact you have a GT350 section with nothing that the GT350 actually uses..
Negative. The current 15-17 2650 TVS is compatible with the GT350 throttle body using an adapter we offer. You can also run a Ford Racing 90mm throttle body. It will not be years before the modular nose is available for 15-17 S550s, just a few months away.So it sounds like if I want to run one of your TVS2650 blowers on my 2016 GT using a GT350 (or larger) throttle body I'm going to have to wait a year or two. Bummer.
Cant wait.Negative. The current 15-17 2650 TVS is compatible with the GT350 throttle body using an adapter we offer. You can also run a Ford Racing 90mm throttle body. It will not be years before the modular nose is available for 15-17 S550s, just a few months away.
Couple months I can do, seems worth waiting for the revised unit since inlet airflow is usually the limiting factor with these PD blowers.Negative. The current 15-17 2650 TVS is compatible with the GT350 throttle body using an adapter we offer. You can also run a Ford Racing 90mm throttle body. It will not be years before the modular nose is available for 15-17 S550s, just a few months away.
The current 15-17 kits are still no slouch. With the 87mm or 90mm throttle body you can make well over 800whp. The larger throttle bodies help carry the power at higher RPMs where these motors really start moving some air.Couple months I can do, seems worth waiting for the revised unit since inlet airflow is usually the limiting factor with these PD blowers.
Mine works well. LOLThe current 15-17 kits are still no slouch. With the 87mm or 90mm throttle body you can make well over 800whp. The larger throttle bodies help carry the power at higher RPMs where these motors really start moving some air.