Sponsored
Euro taillight plug and play modification USA
- Thread starter ohbuckeyes
- Start date
- Watchers 38
BDMACH1
Well-Known Member
- Joined
- Oct 16, 2015
- Threads
- 16
- Messages
- 880
- Reaction score
- 347
- Location
- Ravenna, Ohio
- First Name
- Bob
- Vehicle(s)
- 2016 Mustang GT/CS
Bringing this back up...
I'm finally getting around to installing my 2018 Ford Euro taillights. Does anybody have the pin out laying around they could share with me? I think you are just relocating a few pins on the taillight harness, but I forget...
fsvec
Well-Known Member
- Joined
- Mar 19, 2016
- Threads
- 6
- Messages
- 48
- Reaction score
- 12
- Location
- Longwood, Florida
- First Name
- Francisco
- Vehicle(s)
- '15 Mustang Ecoboost
Did you have any luck successfully making them plug n play?
Rawnjosw
Active Member
I just did the swap tonight with the pin diagram above. It is super easy plug and play. US to EURO
Parking lights on - All red
Brakes - Inside two red and outside amber
Blinker on - Both red then amber, both red then amber, etc. So I guess it’s half sequential.
Sponsored
GTthree50
Well-Known Member
- Joined
- Dec 29, 2016
- Threads
- 25
- Messages
- 805
- Reaction score
- 464
- Location
- San Francisco Bay Area
- Vehicle(s)
- Magnetic Grey 2017 GT350
Don’t know if any of you have seen these.
https://www.cjponyparts.com/renegad...-pair-north-american-spec-2015-2021/p/TLL128/
I had wanted the Euro tail lights like all of you and was ready to address the wiring but could never find any at a decent price then I found these. Complete plug and play. Unfortunately not Ford OEM but they work perfectly and look great.
https://www.cjponyparts.com/renegad...-pair-north-american-spec-2015-2021/p/TLL128/
I had wanted the Euro tail lights like all of you and was ready to address the wiring but could never find any at a decent price then I found these. Complete plug and play. Unfortunately not Ford OEM but they work perfectly and look great.
smiddy012
Active Member
I installed the 5-mode smoked-style vlands, replacing the 2020 OEMs...
The one caution I would say is that they definitely aren't as bright as the 2020 OEMs (which is good at night, because the OEMs were too bright, but not good during the day because if its bright enough outside the vland's light can be barely visible).
Installing was a breeze, even connecting it up to the 3rd brake light was easy.
Looks great off during the day, and great on during at night.
The one caution I would say is that they definitely aren't as bright as the 2020 OEMs (which is good at night, because the OEMs were too bright, but not good during the day because if its bright enough outside the vland's light can be barely visible).
Installing was a breeze, even connecting it up to the 3rd brake light was easy.
Looks great off during the day, and great on during at night.
Sponsored
Last edited: