ESS Centrifugal Mustang Superchargers

[josephstef]

My Shopping list is almost completed now, just waiting for Brevin to see if he can get a cheaper shipping quote.
I'm assuming ill be the RHD test dummy for this

Build is:
KPM(Australian Brand) 1500cc injectors
TI 535LPH Pump
JMS BAP
OPG + Crank Sprocket
Colder NGK Plugs

Looking at the G3 Kit with 8.5 Pulley on NZ pump gas (unleaded 98)

Sponsored

 

[thunderclaps691]

My Shopping list is almost completed now, just waiting for Brevin to see if he can get a cheaper shipping quote.
I'm assuming ill be the RHD test dummy for this

Build is:
KPM(Australian Brand) 1500cc injectors
TI 535LPH Pump
JMS BAP
OPG + Crank Sprocket
Colder NGK Plugs

Looking at the G3 Kit with 8.5 Pulley on NZ pump gas (unleaded 98)

Awesome mate.

 

[Andy13186]

So damn impressed with this ESS kit!! New PB 60-130 only changes were added 3” Magnaflow competition cat back and ran sport mode. Doesn’t shift has hard drag mode so less spin on the street. Still on 7.5 psi pulley

Whats your wheel and tire setup, and who is the tuner? Nice time, but I bet that pulley is rated for that psi at lower rpm than you are revving to so your probably making alot more boost especially in that cool weather.

 

[Brad1810r80]

forgestar f14 Hoosier DBR 28x10.5r17

oz tuning

Shifting at 7400 in cooler weather seeing 10 psi at peak rpm on my mechanical boost gauge

Whats your wheel and tire setup, and who is the tuner? Nice time, but I bet that pulley is rated for that psi at lower rpm than you are revving to so your probably making alot more boost especially in that cool weather.

 

[mazikeen]

My Shopping list is almost completed now, just waiting for Brevin to see if he can get a cheaper shipping quote.
I'm assuming ill be the RHD test dummy for this

Build is:
KPM(Australian Brand) 1500cc injectors
TI 535LPH Pump
JMS BAP
OPG + Crank Sprocket
Colder NGK Plugs

Looking at the G3 Kit with 8.5 Pulley on NZ pump gas (unleaded 98)

who will tune it?

 

[kenand1988]

forgestar f14 Hoosier DBR 28x10.5r17

oz tuning

Shifting at 7400 in cooler weather seeing 10 psi at peak rpm on my mechanical boost gauge

Yeah 10 psi is more like it for those numbers.

 

[Veteran]

Yeah 10 psi is more like it for those numbers.

At 10psi, on pump the engine will pull Timing ?

 

[kenand1988]

At 10psi, on pump the engine will pull Timing ?

I was just saying for the 60-130 numbers 10psi sounds more like it rather than 7.5 psi

 

[josephstef]

who will tune it?

There's a performance shop in NZ called CTB performance, they're really good and have tuned my car before but obviously don't think any ESS superchargers make its way here.

 

[kenand1988]

There's a performance shop in NZ called CTB performance, they're really good and have tuned my car before but obviously don't think any ESS superchargers make its way here.

What kinds fuel do you have out there?

 

[josephstef]

What kinds fuel do you have out there?

its a bit weird here, we call it Unleaded 98, but the use a different measurement (RON) which is your guys 93.
I usually go to gull here, they add 10% ethanol to their 98.

 

[Brad1810r80]

On my straight 93 octane tune with 7.5 psi pulley that makes 10psi peak last couple hundred rpms. I run 18 deg timing with zero knock.

At 10psi, on pump the engine will pull Timing ?

 

[motoracer58]

What was everyones wait time after ordering recently? Got myself excited when I saw most people were having them shipped within a week but I'm still awaiting shipment 2 weeks later, I know i'm just impatient but hard not to be

 

[kenand1988]

Went back to the tuner today. Glad I did because we discovered me going catless changed up my fuel trims pretty dramatically. While it was not a huge difference from my last tune I'm now not rich AF everywhere. And just look how smooth that is with 0 smoothing

 

[XakwardX]

What was everyones wait time after ordering recently? Got myself excited when I saw most people were having them shipped within a week but I'm still awaiting shipment 2 weeks later, I know i'm just impatient but hard not to be

Their website says next batch available dec 22nd so I would assume that’s when they will start shipping them again.

Sponsored