ESS Centrifugal Mustang Superchargers

[josephstef]

@Brevin_G4_SS any Black Friday deals coming

Sponsored

 

[TEXAS HEAT]

Going to try to get some dragy 1/4 mile passes in with the new drag setup if I can go low 10’s on the street I’ll be very very happy!! Still will probably have to leave in 2nd gear.

Hey Brad, What is the wheel and tire set up in the pic?

 

[kenand1988]

For anyone wondering how a 305 would look on the pp1 wheels. I have your answer and it's pretty good

 

[Brad1810r80]

forgestar f14 17x10 rear with Hoosier DBR 28x10.5r17 and forgestar ff14 18x5 front with m&h 28x4:5r18

I will be going to a 305x45r17 et street r on the rear. While the Hoosier hook amazing they’re not street friendly.

Hey Brad, What is the wheel and tire set up in the pic?

 

[josephstef]

Every day is Black Friday pricing for our kits!

Is Fedex the only option available? Shipping is $760USD on the site

 

[Brad1810r80]

So I got my new drag wheels mounted up , went an attempted 1/4 mile dragy pass. I just stopped in road did a very very soft launch in 2nd gear. About 100mph the car started shaking pretty bad and kept getting worse so I let out little after 1/8 mile. Pull over and the tire shop forgot to balance the wheel/tires. So I took back to them and all is good now. Hopefully I'll be able to do another hit tomorrow as its raining here today. This is on 7.5psi 120mm pulley and e30 full.

 

[kevinvan6000]

So I got my new drag wheels mounted up , went an attempted 1/4 mile dragy pass. I just stopped in road did a very very soft launch in 2nd gear. About 100mph the car started shaking pretty bad and kept getting worse so I let out little after 1/8 mile. Pull over and the tire shop forgot to balance the wheel/tires. So I took back to them and all is good now. Hopefully I'll be able to do another hit tomorrow as its raining here today. This is on 7.5psi 120mm pulley and e30 full.

Great numbers for a street pass. On a prepped track you'll be in the 9s for sure.

 

[motoracer58]

Is Fedex the only option available? Shipping is $760USD on the site

I just ordered my kit last night, I had multiple options but FedEx was the cheapest at $200 I think.

 

[josephstef]

I just ordered my kit last night, I had multiple options but FedEx was the cheapest at $200 I think.

Im in NZ but still seems a bit steep, FYI the price has now gone up for me :(

Vortech/Paxton kits ive looked at cost around 450-500 USD to ship to me

 

[Jonyxz]

Im in NZ but still seems a bit steep, FYI the price has now gone up for me :(

Vortech/Paxton kits ive looked at cost around 450-500 USD to ship to me

From Arizona to New Zealand its 7000 miles...Check with the vendor directly...

 

[Veteran]

has anyone gone for the straight cut gears ? Are they unbearably loud ? Any sound clips perhaps ?

 

[kenand1988]

has anyone gone for the straight cut gears ? Are they unbearably loud ? Any sound clips perhaps ?

I can post one tomorrow although I think there is a video up of someone else already. My suggestion is definitely do it if you want people to know it's modified. It's a nice whine. Not loud but audible with the car running at idle or puttering around. You cant really hear it beyond 2k rpm.

 

[kenand1988]

 

[Jonyxz]

For comparison here's a video of whats supposed to be helical. Honestly I dont hear much difference unless Brevin mixed up units and sent me a straight cut instead of helical gears

 

[kenand1988]

For comparison here's a video of whats supposed to be helical. Honestly I dont hear much difference unless Brevin mixed up units and sent me a straight cut instead of helical gears

Yeah I heard yours and thought that was pretty loud for helical gears.

Sponsored