ESS Centrifugal Mustang Superchargers

[gcadorette13]

Thats a cool set up! Keep us updated on how it does.

Will do!

Sponsored

 

[80FoxCoupe]

Once it's on E85 It shouldn't have no prob going high 9's with my 3 pedals.

Awesome! Hopefully you can get out there sooner than later to shake it down.

 

[ejs5.0]

Anyone got instructions on how to change belts and pulley??

I been wanting to pulley down but I don’t wanna mess anything up lol

 

[gcadorette13]

Anyone got instructions on how to change belts and pulley??

I been wanting to pulley down but I don’t wanna mess anything up lol

The belt routing diagram is in the install instructions on the ESS website. Just release the tensioner pull the belt off. Replace pulley, route the new belt accordingly and torque the pulley down when the belt is tight.

 

[ejs5.0]

The belt routing diagram is in the install instructions on the ESS website. Just release the tensioner pull the belt off. Replace pulley, route the new belt accordingly and torque the pulley down when the belt is tight.

Might be a dumb question but what does the tensioner look like?

I found the belt routing diagram and I know the recommended torque for the pulley is 20ft lbs

 

[gcadorette13]

Might be a dumb question but what does the tensioner look like?

I found the belt routing diagram and I know the recommended torque for the pulley is 20ft lbs

It’s the pulley that is right (if your looking at it) of the harmonic balancer. It’s the only pulley that is attached to an arm.

 

[jmeiers]

Anyone got instructions on how to change belts and pulley??

I been wanting to pulley down but I don’t wanna mess anything up lol

Might be a dumb question but what does the tensioner look like?

I found the belt routing diagram and I know the recommended torque for the pulley is 20ft lbs

As respectfully as I can possibly be, I got to ask, did you not install the ESS kit yourself? If you don't know what the belt tensioner is, it is probably best to take it to a shop, especially if you "don't wanna mess anything up".

 

[ejs5.0]

As respectfully as I can possibly be, I got to ask, did you not install the ESS kit yourself? If you don't know what the belt tensioner is, it is probably best to take it to a shop, especially if you "don't wanna mess anything up".

no I didn’t install the kit or the fuel system.

I’m tryna do some of the work myself that’s why I’m asking

Sponsored