Edelbrock 2018-2019 Mustang Modular Inlet 2650 TVS Supercharger – Stage 1 - 15832 & 158320

[Dalton@Evolution]

Bump for stage 2 info

Soon!

Sponsored

 

[4N6DOC]

Looking at the photos it appears the driver's side of the cowl brace is gone.
Do you have to remove that part of the brace to install this supercharger?

 

[Edelbrock Tech]

Looking at the photos it appears the driver's side of the cowl brace is gone.
Do you have to remove that part of the brace to install this supercharger?

Good question! The car in the photos did not come with that brace from the factory. The Edelbrock supercharger DOES NOT require removal of the brace as seen below.

 

[4N6DOC]

Good question! The car in the photos did not come with that brace from the factory. The Edelbrock supercharger DOES NOT require removal of the brace as seen below.

Thanks.
Another question. Is the supercharger compatible with cars that have adaptive cruise control?
I have read of some supercharger kits having issues with the intercooler not fitting or interfering with ACC cars.
Thanks again.

 

[Edelbrock Tech]

Thanks.
Another question. Is the supercharger compatible with cars that have adaptive cruise control?
I have read of some supercharger kits having issues with the intercooler not fitting or interfering with ACC cars.
Thanks again.

Our supercharger kit does not interfere with adaptive cruise control.

 

[4N6DOC]

Our supercharger kit does not interfere with adaptive cruise control.

Awesome.
Thanks.

 

[Kona 18]

Any chance we'll get more info on the stage 2 anytime soon? Also, will the 103mm be compatible with the digital 2018 TB? It's not like the 11-14 or 15-17's.

 

[Edelbrock Tech]

BUMP!

 

[aleccolin]

Is there more info?

 

[Kona 18]

Is there more info?

I ordered one last week, will post pics and what not once it's all here.

 

[West TX GT]

I just read the warranty and it seems to have less shenanigans then Roush and Whipple. I think this will be the route I'm going. All the Gen 3 coyote fear has made me a little nervous about boost. Can't wait to hear the stage 2 info!

 

[4N6DOC]

Question for the Edelbrock Tech. On your website for the 15832 supercharger I am getting the following when I put in my car:
Is this an error on the website? it was my understanding the 18 and 19's are the same so the supercharger is compatible with my 2019.

This part is not compatible with your 2019 Ford Mustang GT Premium 302cid (5.0L) V8 (99F) (343kW) !


https://www.edelbrock.com/e-force-s...premium-302cid--5-0l--v8--99f---343kw--356876

 

[Edelbrock Tech]

Question for the Edelbrock Tech. On your website for the 15832 supercharger I am getting the following when I put in my car:
Is this an error on the website? it was my understanding the 18 and 19's are the same so the supercharger is compatible with my 2019.

This part is not compatible with your 2019 Ford Mustang GT Premium 302cid (5.0L) V8 (99F) (343kW) !


https://www.edelbrock.com/e-force-s...premium-302cid--5-0l--v8--99f---343kw--356876

Sorry about that. The web site is new and the data is not up to date. This will work with 2018 and 2019 model year Mustangs. I'll get this corrected ASAP. Thanks!

 

[West TX GT]

I have a question for Edelbrock Tech. Can we install billet oil pump gears and crank sprocket and keep the warranty?

 

[LiquidFlame]

@Edelbrock Tech A question for you: is there anything new on the 15-17 modular inlet stage 2 setups yet? Just wondering if it would be smart of me to wait to get a kit for my 17

Sponsored