Does anyone have a pic of the Mach 1 “twister orange” calipers on an “orange fury” mustang?

[COYOTE_64S25FEF]

Even if you matched them, the slightest amount of brake dust is going to affect the appearance and match.

I second the notion of going with a complementary color.

Sponsored

 

[GTP]

Even if you matched them, the slightest eat amount of brake dust is going to affect the appearance and match.

I second the notion of going with a complementary color.

It is possible that his GT Premium brakes already have OEM low-dust pads.

Otherwise, OP needs to consider buying Z23 pads from Rock Auto as part of his project. They will change his life!

 

[lo-fi]

Don't forget about the G2 Caliper Paint option (if you stick with your stock brakes). I just ordered some the other day for my Orange Fury (I ordered two kits since most say one isn't enough for our brakes).

G2 Orange Fury Caliper Paint

DIY Video on Youtube

 

[GTP]

Don't forget about the G2 Caliper Paint option (if you stick with your stock brakes). I just ordered some the other day for my Orange Fury (I ordered two kits since most say one isn't enough for our brakes).

G2 Orange Fury Caliper Paint

DIY Video on Youtube

I thought about suggesting this but wrongly assumed OP had already looked for G2 in OF and not found it.

 

[526 HRSE]

This is mine.

Those rotors look shot

 

[Fred Luehrs]

I found someone selling a kit of Mach one Brembo’s and I was curious how far off it would look if I put it on my orange fury Mustang. I would love the colors to match, but didn’t know how far off they were. It’d be nice if someone actually has the set up to be able to see before spending the thousand dollars.

I had to use the POR 15 engine enamel and mix orange and yellow to get anything even close. The matching took a couple of tries. It held up to a track day at Road America and those babies got hot. They are good from far but far from good. better than bare metal for sure.

 

[Perna00]

I had to use the POR 15 engine enamel and mix orange and yellow to get anything even close. The matching took a couple of tries. It held up to a track day at Road America and those babies got hot. They are good from far but far from good. better than bare metal for sure.

excellent look! Exactly what I was looking for. The color will definitely show if it is off.

 

[Fred Luehrs]

excellent look! Exactly what I was looking for. The color will definitely show if it is off.

If you go that route. start with 2 parts yellow and 1 part orange and tweek from there. mix in baby food jar or the like. I feel like a corvette owner when people ask me about them, I tell them the brakes are the only ones like that and the car is now a 1 of 1. LOL

 

[Track Mach]

Those rotors look shot

They stop me where I need to stop. They may not look pretty but no issues.

 

[JoeCee]

I had to use the POR 15 engine enamel and mix orange and yellow to get anything even close. The matching took a couple of tries. It held up to a track day at Road America and those babies got hot. They are good from far but far from good. better than bare metal for sure.

Nice! I’m your neighbor in Elm Grove

 

[mavisky]

Don't forget about the G2 Caliper Paint option (if you stick with your stock brakes). I just ordered some the other day for my Orange Fury (I ordered two kits since most say one isn't enough for our brakes).

G2 Orange Fury Caliper Paint

DIY Video on Youtube

I thought about suggesting this but wrongly assumed OP had already looked for G2 in OF and not found it.

Good to see they have it as one of their "standard" colors now. I had to use their custom color match feature back in 2019 to have mine done. There are a few chips and scratches from years of wheel changes and hard use, but they still clean up great. I can literally clean the calipers with a paper towel with brake cleaner on it. The coating is exceptionally resilient.

I do suggest using a preval sprayer for at least the back half of the application as it helps the epoxy level out much better. Brembo decals are just vinyl applied on top of the G2 with zero issues.

 

[Perna00]

I went with the G2 kit:

 

[Fred Luehrs]

I went with the G2 kit:

Do you have a picture of it on the car? where did you get that paint kit?

 

[lo-fi]

Do you have a picture of it on the car? where did you get that paint kit?

https://g2usa.com/products/ford-nl-brake-caliper-paint

 

[Perna00]

I still have the front on Jack stands as I’m changing out the lower grill and porting out the top one. I’ll send pics when it’s back together. Here is the rear. It was definitely worth getting the paint because if it was slightly off, you would’ve definitely noticed, and it would not look nearly as good.

Sponsored