Sponsored

DIY MyColor center cluster install

italianfroboy

Member
Joined
Jun 16, 2021
Threads
0
Messages
20
Reaction score
1
Location
Ankeny, Iowa
First Name
Griffin
Vehicle(s)
2016 Ford Mustang
I am sorry. I gave you my factory as-built config. The one that I am using for the drive modes is - 7C6D-167B-9840. please let me know if it worked for you.
Sounds good, I’ll give it a try tonight
Sponsored

 

tangguy

Well-Known Member
Joined
Jun 12, 2020
Threads
109
Messages
500
Reaction score
210
Location
Virginia
First Name
Raul
Vehicle(s)
2018 Mustang GT PP1
Sounds good, I’ll give it a try tonight
from the forum I am also seeing that people used this code -
-If you have a Manual

720-06-01: 786F 0664 1897.


you can try this as well if mine doesn't work
 

tangguy

Well-Known Member
Joined
Jun 12, 2020
Threads
109
Messages
500
Reaction score
210
Location
Virginia
First Name
Raul
Vehicle(s)
2018 Mustang GT PP1

Sponsored

Joined
Jul 29, 2023
Threads
0
Messages
15
Reaction score
5
Location
Southeast Georiga
First Name
Andy
Vehicle(s)
15 Roush Mustang, 17 F-Pace, 00 Firebird, 99 Rado
I enabled Line Lock but it's greyed out. Looks like I need to swap the ABS module with a GT module to get it working.
You do not have to swap the abs module. It may be easier if you have one that already has that file already written to it. they are all the same part the software file is all that’s different. all you need is the calbriation files and the 2.4 beta version of FORScan so you can program files. I followed a thread about adding Line lock to non GT and it. Works you have to enable it in the IPC and enable it in the abs module after you “update the abs module with the calibration file there is something in the as built one value I had to change but I’d you follow the instructions it’s easy.
Sponsored

 
 




Top