NGOT8R
Well-Known Member
- Thread starter
- #91
Thanks cbrtrx, I wasn’t sure. That means I’ll have to tweak the sensor scaling some more. Help me to understand this little better. My BAP is programmed to ramp up voltage beginning at 1/2 throttle and reaching 18V at 3/4 throttle. Should I be seeing about 58 psi of normal pressure and only an increase to 60-70 psi when the BAP voltage increases at ramp up? Before I made any adjustment to the scaling on the fuel pressure sensor, I was reading 78 psi, so that confused me and made me think the scaling of the sensor was a little off.Fuel pump duty cycle and fuel pressure are not the same. Base pressure is around 58, with a bap it will be around 68 to 70.
Sponsored