CHEMICAL GUY's PRO BLOW, Blower? Worth it or not......

[Slopoke]

If it were me, I'd just use my Stihl leaf blower instead of spending more money. I'm a cheap bastard!

Sponsored

 

[Evolvd]

I second the Ego 765 with stubby nozzle. It moves a ton of air and also works as a nice leaf blower and driveway clearer after mowing.

 

[FKE SNK]

Ego 765 with stubby nozzle, thank me later.

Richard

Just picked up a stubby for mine. It's a game changer for sure - especially on my truck. Plus its still a solid leaf blower I can go clean off the patio/driveway with. Everyone who tries it laughs hysterically when they try the scramble button.

Works great for stoking fire pits into 12 foot high pillars of flame too

 

[StangTime]

I dry with an EGO 650 blower. Not as powerful as the newer 765 but damn it works!
Where can I get that stubby attachment?

 

[mrgooden]

I dry with an EGO 650 blower. Not as powerful as the newer 765 but damn it works!
Where can I get that stubby attachment?

https://www.etsy.com/listing/104729...N4XtG_AEKdbAX-xGdWzcKxSaWMLiWlcEaAlviEALw_wcB

Or nozzle and band.

https://www.obsessedgarage.com/prod...zk40155QiYxgb-fPi_4DXeSM4BDgFHkYaAtpiEALw_wcB

Richard

 

[Evolvd]

I dry with an EGO 650 blower. Not as powerful as the newer 765 but damn it works!
Where can I get that stubby attachment?

I got mine from Stubby Nozzle Company on Etsy. You can also get the silicon end ring to protect your paint should you accidentally bump the nozzle into your car. Obsessed Garage is also offering them but at a higher price of course.
Etsy also has wall mounts for the various blowers that are great.

 

[StangTime]

https://www.etsy.com/listing/104729...N4XtG_AEKdbAX-xGdWzcKxSaWMLiWlcEaAlviEALw_wcB

Richard

I got mine from Stubby Nozzle Company on Etsy. You can also get the silicon end ring to protect your paint should you accidentally bump the nozzle into your car. Obsessed Garage is also offering them but at a higher price of course.
Etsy also has wall mounts for the various blowers that are great.

Thank you gentlemen!

 

[kilobravo]

One question, do you use a pressure washer or just a garden hose to rinse?

Ed: No garden hoses in my car wash workflow these days, I picked up a Kranzle 1122TST a couple years back and do the first rinse on house-softened water. For the d-i rinse afterward, (a couple QC fittings later,) the Kranzle lets me lower the pressure down to 600psi which I've calculated is about 1.5GPM. Being the second rinse, I mainly just ensure that I push all the previous water off.

I run her up and down the driveway about four times to warm up the brakes and help evaporate the water and avoid a sticky pad. Then I pull her inside and dry her with a Metrovac Master Blaster. Still have a TON of quality drying towels that I need to give to someone who still uses them. What a great device and highly recommended.

Sponsored