Can MT drag radials 305/35/20 fit on lowered S550?

[BlownCoyote]

I recently bought a '16 S550 with Kenne Bell blower, lowered, with Cooper Tires. The tires are horrible at maintaining traction under boost. This quickly becomes a problem when I go fast lol.

Will the Mickey Thompson ET Street 305/35/20 fit in the rear? The car is mildly lowered using rear lowering springs.

Sponsored

 

[Paul@PKAUTODESIGN]

I recently bought a '16 S550 with Kenne Bell blower, lowered, with Cooper Tires. The tires are horrible at maintaining traction under boost. This quickly becomes a problem when I go fast lol.

Will the Mickey Thompson ET Street 305/35/20 fit in the rear? The car is mildly lowered using rear lowering springs.

Is this with factory wheels or aftermarket wheels?

 

[BlownCoyote]

Aftermarket wheels. The current tires are Coopers and they have no bite. I also read the Nittos 555s are a good tire.

 

[robwlf]

depends on off set of the rim mostly

 

[Mike K.]

They can fit it depends on the offset , I actually squeezed 315s back there but you gotta also make sure your camber is slightly negative which it most likely is from lowering plus ensure the cradle is centered

 

[BlownCoyote]

How do I ensure the cradle is centered?

They can fit it depends on the offset , I actually squeezed 315s back there but you gotta also make sure your camber is slightly negative which it most likely is from lowering plus ensure the cradle is centered

 

[Monkeybutt1234]

steeda alignment kit

 

[Paul@PKAUTODESIGN]

It can work just all depends on the wheel and from there some camber adjustment.

 

[Pincushin3819]

[MENTION=27078]Paul@PKAUTODESIGN[/MENTION] will they work with KMC District 20x10.5?

 

[Paul@PKAUTODESIGN]

[MENTION=27078]Paul@PKAUTODESIGN[/MENTION] will they work with KMC District 20x10.5?

If it is a 20x10.5 ET 45 then yes sir it can work.

Sponsored