Bullitt AfterMarket Wheels Suggestions?

[AnthonyA1234]

I’m looking to get some aftermarket wheels on my bullitt so I can run wider tires in the back. Any nice looking wheel suggestions that wouldn’t ruin the bullitt look?

Sponsored

 

[cactus_kid]

http://carrollshelbywheels.com/product-category/car

 

[Voo Doo]

Yep... gunmetal Grey!!

 

[Voo Doo]

Here’s the polished chrome I use to have on my BULLITT and the gunmetal on top!!!

 

[AnthonyA1234]

Here’s the polished chrome I use to have on my BULLITT and the gunmetal on top!!!

Looks great Voo Doo, do you have any more photos of the gunmetal grey wheels so I can have more reference?

 

[WhatTheFetch]

As Mikey TX and Voo Doo posted, you can't go wrong with Shelby CS-11's. I originally was going to go with the gunmetal finish but I got a smoking deal on a set in black. I'm very happy with them and they look OEM.

275/35/20 and 305/35/20

 

[zack.whitford]

As Mikey TX and Voo Doo posted, you can't go wrong with Shelby CS-11's. I originally was going to go with the gunmetal finish but I got a smoking deal on a set in black. I'm very happy with them and they look OEM.

275/35/20 and 305/35/20

So that's the 20x9.5 up front with the 20x11 in the rear?

 

[WhatTheFetch]

So that's the 20x9.5 up front with the 20x11 in the rear?

Correct, specs below..

Wheel Specs and Dimensions:
- Size: 20" x 9.5" (Front) and 20” x 11” (Rear)
- Lugs: 5 x 114.3mm (5 x 4.5")
- Finish: Chrome Powder with Polished Lip
- Backspacing: 6.80" and 7.94”
- Offset: +40mm and +50mm
- Center Bore: 70.7mm
- Construction: Flow-Formed Cast Aluminum
- Weight: 27.8 lbs. and 29 lbs.
- Center Caps: Included and Features ‘Carroll Shelby’ Logo
- Valve Stem TPMS Compatible

 

[Pruitttands]

Fr500 style from am. 305 rear

 

[zack.whitford]

Correct, specs below..

Wheel Specs and Dimensions:
- Size: 20" x 9.5" (Front) and 20” x 11” (Rear)
- Lugs: 5 x 114.3mm (5 x 4.5")
- Finish: Chrome Powder with Polished Lip
- Backspacing: 6.80" and 7.94”
- Offset: +40mm and +50mm
- Center Bore: 70.7mm
- Construction: Flow-Formed Cast Aluminum
- Weight: 27.8 lbs. and 29 lbs.
- Center Caps: Included and Features ‘Carroll Shelby’ Logo
- Valve Stem TPMS Compatible

Thanks! I really appreciate the detailed info. Were you at stock ride height in those photos?

 

[Bear_Stang]

Grabbed these from LMR. They look amazing, but they diverge from the bullitt feel a bit.
https://lmr.com/item/WTK-177906GA/mustang-sve-r350-wheel-tire-kit-bronze-19x10-15-17-g2

 

[zack.whitford]

Very cool. Gold/bronze and DHG look so great together.

 

[WhatTheFetch]

Thanks! I really appreciate the detailed info. Were you at stock ride height in those photos?

Yes sir, bone stock.. Only other mod is a re-wrapped steering wheel that I haven't got around to installing..

 

[Bulutt]

Sorry guys, I don't have an issue with any of the wheels themselves, only that I don't get buying a Bullitt, a car specifically produced to be an homage to the movies car, and then installing wheels that could be found on any car anywhere!! Just seems odd to me why you would not keep the Bullitt theme.

 

[Voo Doo]

Sorry guys, I don't have an issue with any of the wheels themselves, only that I don't get buying a Bullitt, a car specifically produced to be an homage to the movies car, and then installing wheels that could be found on any car anywhere!! Just seems odd to me why you would not keep the Bullitt theme.

So the Black ones and the Blue ones don’t count either huh?? These are just cars... not museum pieces!!...a true homage would be if you replicated Steve’s car at about $80+ G’s...then that’s ok!! Do what makes you feel good!!! They didn’t have Navi either..or heated steering wheel!! Take them all out!! It’s ok pal...these are just cars!!!

Sponsored