budget drag wheel and tire setup, check this out.

[higdominator]

Also FYI Enkei RPF1's are super light in the 17x8 and 17x9's and make a killer drag setup as well. You can run a 235 on the 17x8 and still be legal for most roll race events and the combo will still weigh the same as a weld 17x4.5/5 and MT Sportsman. The 17x9 weighs 15lbs....

Sponsored

 

[K71000]

Also FYI Enkei RPF1's are super light in the 17x8 and 17x9's and make a killer drag setup as well. You can run a 235 on the 17x8 and still be legal for most roll race events and the combo will still weigh the same as a weld 17x4.5/5 and MT Sportsman. The 17x9 weighs 15lbs....

Any idea where I can get the rear Enkeis?

 

[higdominator]

Any idea where I can get the rear Enkeis?

I know Beefcake has them on his site.


Also note that Jeg's lists the SSR series of wheels. They have a 17x4.5 ET -24.5 and a 17x8 ET 25.

They come in a Vitesse and Alumastar style. I am test fitting a set tomorrow with a 28X11.5-17 ET Street R Bias.

All 4 wheels were ~$800 @ 199.00 ea.

 

[K71000]

I know Beefcake has them on his site.


Also note that Jeg's lists the SSR series of wheels. They have a 17x4.5 ET -24.5 and a 17x8 ET 25.

They come in a Vitesse and Alumastar style. I am test fitting a set tomorrow with a 28X11.5-17 ET Street R Bias.

All 4 wheels were ~$800 @ 199.00 ea.

Thx for the quick reply. What’s the weight of the rear SSRs compared to the enkeis?

 

[ctandc72]

I just received two of these:

https://www.americanmuscle.com/solidblack-bullitt-17x9-0513.html

With discount code less than $200 shipped for both.

The 28x11.50x17 MT ET Street R Bias should be here tomorrow.

 

[K71000]

I just received two of these:

https://www.americanmuscle.com/solidblack-bullitt-17x9-0513.html

With discount code less than $200 shipped for both.

The 28x11.50x17 MT ET Street R Bias should be here tomorrow.

What’s the offset of the wheels and weight?

 

[ctandc72]

What’s the offset of the wheels and weight?

30mm offset and 27lbs.

There are several posts on this forum of this wheel being used on the S550 with zero clearance issues.

 

[K71000]

30mm offset and 27lbs.

There are several posts on this forum of this wheel being used on the S550 with zero clearance issues.

Thx appreciate it. PLease post pics once mounted if possible. Thx

 

[higdominator]

Thx for the quick reply. What’s the weight of the rear SSRs compared to the enkeis?

Fronts with tire are almost 35lbs each. Rears with the 28x11.5-17 are just shy of 45lbs each. My daily wheels/tires are 50lb each with wheels that weigh 24lbs.

The offset and fitment are dead on with the SSR wheels.

 

[08StangGT_CS]

Fronts with tire are almost 35lbs each. Rears with the 28x11.5-17 are just shy of 45lbs each. My daily wheels/tires are 50lb each with wheels that weigh 24lbs.

The offset and fitment are dead on with the SSR wheels.

What rear tire are you using?

 

[ctandc72]

I'll try to weigh mine today. In a bit headed to get the 28x11.50x17 MT ET Street R Bias mounted and balanced.

 

[higdominator]

What rear tire are you using?

ET Street R Bias ply.

 

[Notagain]

Fronts with tire are almost 35lbs each. Rears with the 28x11.5-17 are just shy of 45lbs each. My daily wheels/tires are 50lb each with wheels that weigh 24lbs.

The offset and fitment are dead on with the SSR wheels.

What are those and the specs those look great!!

Derp never mind i see you listed above. Sorry.

 

[08StangGT_CS]

ET Street R Bias ply.

Any concerns with running bias ply rear and radial front?

 

[ctandc72]

Didn't have time to weigh them - will do it tomorrow morning before mounting and heading to the track.

Sponsored