VengeanceClutch
Member
- Joined
- Jun 2, 2020
- Threads
- 10
- Messages
- 16
- Reaction score
- 4
- Location
- Conyers,Ga
- Website
- www.facebook.com
- First Name
- Chris
- Vehicle(s)
- 1996 Mustang GT
- Thread starter
- #1
Hello and welcome to Vengeance Clutch by Competition Clutch!
We are a new branch under the Competition Clutch family tree.
We build performance Mustang twin disc clutches for your high powered Mustangs!
Our offerings start at the Foxbody cars and we go all the way to the current S550 cars.
The clutch is made with a higher load pressure plate. Mated with either a 240mm unsprung Organic, Ceramic, Or 6-puck disc and Floater ring to make our top clutch pack. Below it will be your matching disc on a beautiful in-house steel flywheel that holds it all together.
What you will notice with our clutch is your daily driving isn't sacrificed with a super heavy pressure plate. You get all of the grab you will need to put 950WTQ to the ground, with the feeling of a OEM clutch. We wanted to make a clutch you can drive, but also take to the track and lay personal and track best on, then drive it home.
Our kits come complete with all required items for install. We built this kit to be used with your OEM throwout bearing so no upgrades are required for this clutch!
Pricing is as follows:
ORGANIC - STOCK SPLINES - 750wtq - $850.00
CERAMIC - 26 SPLINES - 850wtq - $1,020.00
6-PUCK - 26 SPLINES - 950wtq - $1,071.00
We are a new branch under the Competition Clutch family tree.
We build performance Mustang twin disc clutches for your high powered Mustangs!
Our offerings start at the Foxbody cars and we go all the way to the current S550 cars.
The clutch is made with a higher load pressure plate. Mated with either a 240mm unsprung Organic, Ceramic, Or 6-puck disc and Floater ring to make our top clutch pack. Below it will be your matching disc on a beautiful in-house steel flywheel that holds it all together.
What you will notice with our clutch is your daily driving isn't sacrificed with a super heavy pressure plate. You get all of the grab you will need to put 950WTQ to the ground, with the feeling of a OEM clutch. We wanted to make a clutch you can drive, but also take to the track and lay personal and track best on, then drive it home.
Our kits come complete with all required items for install. We built this kit to be used with your OEM throwout bearing so no upgrades are required for this clutch!
Pricing is as follows:
ORGANIC - STOCK SPLINES - 750wtq - $850.00
CERAMIC - 26 SPLINES - 850wtq - $1,020.00
6-PUCK - 26 SPLINES - 950wtq - $1,071.00
Sponsored
Last edited: