Status
Not open for further replies.
Joined
Jun 2, 2020
Messages
16
Reaction score
3
Location
Conyers,Ga
Website
www.facebook.com
First Name
Chris
Vehicle(s)
1996 Mustang GT
Hello and welcome to Vengeance Clutch by Competition Clutch!

We are a new branch under the Competition Clutch family tree.

We build performance Mustang twin disc clutches for your high powered Mustangs!

Our offerings start at the Foxbody cars and we go all the way to the current S550 cars.

The clutch is made with a higher load pressure plate. Mated with either a 240mm unsprung Organic, Ceramic, Or 6-puck disc and Floater ring to make our top clutch pack. Below it will be your matching disc on a beautiful in-house steel flywheel that holds it all together.

What you will notice with our clutch is your daily driving isn't sacrificed with a super heavy pressure plate. You get all of the grab you will need to put 950WTQ to the ground, with the feeling of a OEM clutch. We wanted to make a clutch you can drive, but also take to the track and lay personal and track best on, then drive it home.

Our kits come complete with all required items for install. We built this kit to be used with your OEM throwout bearing so no upgrades are required for this clutch!

Pricing is as follows:
ORGANIC - STOCK SPLINES - 750wtq - $850.00
CERAMIC - 26 SPLINES - 850wtq - $1,020.00
6-PUCK - 26 SPLINES - 950wtq - $1,071.00

new flyer.jpg
 
Last edited:

94Mustang302ci

Well-Known Member
Joined
Sep 30, 2018
Messages
92
Reaction score
40
Location
Covington, Georgia
First Name
Shaun
Vehicle(s)
2016 Ford Mustang GT
I already have an RST Twin with matching lightened steel flywheel, and TOB. Will this clutch work with these parts?
 
OP
VengeanceClutch
Joined
Jun 2, 2020
Messages
16
Reaction score
3
Location
Conyers,Ga
Website
www.facebook.com
First Name
Chris
Vehicle(s)
1996 Mustang GT
  • Thread starter
  • Thread Starter
  • #3
I already have an RST Twin with matching lightened steel flywheel, and TOB. Will this clutch work with these parts?
No sir it wont. Our clutch is our own variants of matching parts. They can't be matched with another brands parts as it will cause a misalignment in the clutch for having different tolerances between them. We appreciate your time very much!
 

94Mustang302ci

Well-Known Member
Joined
Sep 30, 2018
Messages
92
Reaction score
40
Location
Covington, Georgia
First Name
Shaun
Vehicle(s)
2016 Ford Mustang GT
No sir it wont. Our clutch is our own variants of matching parts. They can't be matched with another brands parts as it will cause a misalignment in the clutch for having different tolerances between them. We appreciate your time very much!
Ah, gotcha! I read it wrong the first time. The kit includes your flywheel.
 

Advertisement

Status
Not open for further replies.




 
199 - Racer X Fabrication


Advertisement
Top