Boosted 350's come on in!

[MNShelby]

ihttps://rallyroad.net/products/e36steeringcolumnmountedgaugepods

works like a charm . I have them in 3/4 cars . It’s a convenient location for the Ngauge and easily moved between cars before reach car had its own NGauge
The angle of the POD is adjustable but will still obstruct the Tach, but you can set up the gauge to read rpm ... and more .

Thanks this is very helpful and the option I think I'll go. But it looks like there are a few options which appear to be mainly for BMW's (E30, E36, and E46). Does the one you linked here fit the GT350 I assume, the E36? I'd like to get one that's as plug and play as possible, so if they offer the option with a steering column attached that would be good. I also think the 52mm, or 2 1/16 inch would match the 2 in the center console if I'm not mistaken.

Thanks!

Sponsored

 

[olaosunt]

Thanks this is very helpful and the option I think I'll go. But it looks like there are a few options which appear to be mainly for BMW's (E30, E36, and E46). Does the one you linked here fit the GT350 I assume, the E36? I'd like to get one that's as plug and play as possible, so if they offer the option with a steering column attached that would be good. I also think the 52mm, or 2 1/16 inch would match the 2 in the center console if I'm not mistaken.

Thanks!

They don’t make one specific for any mustang but I have the one in the link in 3 S550’s(including the GT 350) and it works .
It attaches(pretty sticky ) to the steering column .
You can specify what size gauge pods .
The 52 mm will work . I needed the 60 mm for the Eboost 2 in my Hellion car

 

[MNShelby]

They don’t make one specific for any mustang but I have the one in the link in 3 S550’s(including the GT 350) and it works .
It attaches(pretty sticky ) to the steering column .
You can specify what size gauge pods .
The 52 mm will work . I needed the 60 mm for the Eboost 2 in my Hellion car

Perfect thank you!

 

[olaosunt]

More pics to see how they mount

 

[MNShelby]

They don’t make one specific for any mustang but I have the one in the link in 3 S550’s(including the GT 350) and it works .
It attaches(pretty sticky ) to the steering column .
You can specify what size gauge pods .
The 52 mm will work . I needed the 60 mm for the Eboost 2 in my Hellion car

Also- although several sites sell the ecoboost gauge set, I can't find the sizes of the individual gauges. Pretty sure these are 2 1/16" but if anyone knows differently I appreciate a quick correction. Thanks!

 

[olaosunt]

Another option below
As you can see I can’t have enough gauges !

 

[olaosunt]

Lol

 

[lightrules]

how are those glow shift gauges? some of those amazon reviews are scary...

 

[Tonymustang302]

any other brands? ford performance? i dont hear of many other brands for these parts...

dont do mmr’s chain guides. Honey badger Said his we’re wearing away

 

[madlag]

They don’t make one specific for any mustang but I have the one in the link in 3 S550’s(including the GT 350) and it works .
It attaches(pretty sticky ) to the steering column .
You can specify what size gauge pods .
The 52 mm will work . I needed the 60 mm for the Eboost 2 in my Hellion car

It attaches via double sided tape or can you use screws?

 

[olaosunt]

It attaches via double sided tape or can you use screws?

Not sure you can screw it down but it is pretty solid with the tape .
The first one I did on my Hellion car has not moved an inch in 3 years .

 

[olaosunt]

how are those glow shift gauges? some of those amazon reviews are scary...

I know they are cheap but they have worked well for me . I have the oil temp and pressure gauges in both my Hellion and KB car .Nice thing about them is you can change the colors to match your MYcolor .

I replaced the oil pressure sender in the KB car earlier this year (after 3 years ) and the one they sent me was a dud / broken . Customer service was great and they sent out a good replacement immediately.

 

[Kobi Addiction]

guys, besides the OPG and CS, how many of you (or how important is it) to also do, since we're already doing the OPGs...

MMR Billet Chain Guides / Arms Kit
MMR Billet Primary Chain Tensioners

anyone else do these also?

I run the MMR guides and tensioners along with their OPG and CS. Havent had any issues with any of their products, and im going on 25k boosted miles since installing them. That's not to say they are not wearing like someone mentioned, but i haven't noticed any amounts of metal particles with my oil changes.

 

[cdh027]

I run the MMR guides and tensioners along with their OPG and CS. Havent had any issues with any of their products, and im going on 25k boosted miles since installing them. That's not to say they are not wearing like someone mentioned, but i haven't noticed any amounts of metal particles with my oil changes.

I dont think you would see any metal as the guides are a plastic/composite material.

 

[Kobi Addiction]

dont do mmr’s chain guides. Honey badger Said his we’re wearing away

I dont think you would see any metal as the guides are a plastic/composite material.

The wearing part that was mentioned about HoneyBadger was the tensioner pushing up against the billet chain guide and wearing it down. This is a piece I would still purchase but change out for new guides after every motor refresh, but thats just me. I'm 41k miles into my motor, and will break it down at 100k. I dont drive no where near as hard as HoneyBadger But yes, the plastic wear strip wouldn't show much of anything.

Sponsored