BMR Tech's S550 Mustang Build: Street/Strip

[LindsayEOD]

Really cool build Kelly. Now hurry up with those black Friday deals!

Sponsored

 

[cdenoma]

Nice build man! I'm curious though, I see the spacers on your 20/19 wheel combo. But are they widened at all? Or are they the stock performance pack wheels?

Edit: I don't think those are the stock wheels.. My bad. Any info on them though?

 

[pinero61]

I do.

I have MMR OPG and the Timing Gear.

I spin over 8K RPM....so.....yeah. :cheers:

Is that all that's really need to rev out to 8k reliably? I'm about to drop a CJ intake and cams into mine, so I really want to up the revs to take advantage of this.

 

[sonic]

Is that all that's really need to rev out to 8k reliably? I'm about to drop a CJ intake and cams into mine, so I really want to up the revs to take advantage of this.

His bottom end is built also

 

[pinero61]

His bottom end is built also

Figured that was too good to be true, lol.

I'll stick to 7,500 until I do a full build.

 

[BMR Tech]

Last weekend I went ahead and picked up a FTBR Coolant Tank Cover to hold me over.

I think the $60~ was money well spent. It isn't fancy, but does the trick! I am a big fan of OEM engineered pieces under the hood....so this just made sense for now, for me. Many of my friends think it is hideous, but that is fine. They can line 'em up and I will show them what hideous is? ;)

 

[BMR Tech]

While waiting on my ID1300 Injectors and some other goodies, I decided to go ahead and throw the VMP BAP on the car.

I am running a twin pump set-up...and I do not think I need to run the BAP very hard, but I like to have a consistent V to the pumps, and somewhat of a failsafe if voltage drops.

I tested the VMP BAP at 18v out of the box. I opened it up and reduced the output to 16.6V on the bench...installed and bam! Works like a charm.

 

[sonic]

What is the thing in the center off your well?

 

[BMR Tech]

What is the thing in the center off your well?

The black, the orange, or the piece that the nitrous line is resting in? lol

 

[evo8904]

Last weekend I went ahead and picked up a FTBR Coolant Tank Cover to hold me over.

I think the $60~ was money well spent. It isn't fancy, but does the trick! I am a big fan of OEM engineered pieces under the hood....so this just made sense for now, for me. Many of my friends think it is hideous, but that is fine. They can line 'em up and I will show them what hideous is? ;)

The cover looks really good. I would have gotten one if I wouldn't have gotten the mishimoto.

 

[sonic]

The black, the orange, or the piece that the nitrous line is resting in? lol

Ok nitrous bracket now I get it

 

[Poppacapp]

The black, the orange, or the piece that the nitrous line is resting in? lol

Nitrous???

 

[BMR Tech]

Some recent pics I snapped. Washed the car for the first time since I started the thread. (real wash, not dust it and go..lol)

I am loving this thing.

Going to the track Friday to see what she has on boost only, with weight removed and the Drag Pack wheels and tires on. I am anxious!

 

[BMR Tech]

On that note, why is my build in the Vendor Section?

I pay for this build, not BMR. lol

I guess my career makes it that way. I have been building my Mustangs well before I started working in this industry.

 

[sonic]

I [emoji102]a new T body

Sponsored