BMR sway bars (which setting?) And Steeda vertical links 😁 Bling pics!!!

[monte87]

Hey guys,

Just got my suspension parts today , BMR front and rear adjustable sway bars and poly bushings and Steeda vertical links. Cant wait to install this weekend.
I hit the steeda parts w a little white rouge polish on a buffer to bling it out a little lol they are soooo purityeeeeeee.
Question, what setting on the adjustable sway bars should I set them?
Thanks Anthony

Sponsored

 

[CliffClavin]

Start the sways in the middle setting and go from there. Are you doing springs as well?

 

[TopJimmyCooks]

You could start with both on lightest setting or in the middle. I ended up with tight in front, middle in back. But I have different suspension. Also check this out, might be helpful: https://speedsecrets.com/tune-car-handling/

 

[monte87]

Links are a work of beauty!

Thanks dude. Those links are an awesome piece to begin with, meaty and pretty!! Buffed w a little white rouge, Woke the mirror like shine hidden below.
Anthony

 

[monte87]

Start the sways in the middle setting and go from there. Are you doing springs as well?

Hi, thanks for reply. Oh ok.. no, on springs. The only suspension mods I have done are steeda front lower k member brace, rear IRS brace and now sway bars and vertical links
Thanks Anthony

 

[monte87]

You could start with both on lightest setting or in the middle. I ended up with tight in front, middle in back. But I have different suspension. Also check this out, might be helpful: https://speedsecrets.com/tune-car-handling/

Thanks Jimmy!!!

 

[KellTrac]

So many variables here. I always have people start at the middle of the front settings and the softest of the rear settings. Pretty much universally. I would say 9 out of 10 times, people end up full tight front and full soft rear.

Sponsored