BMR Suspension's New S550 Rear Upper SHOCK MOUNTS: SM760 - Design Finalized!

[Burkey]

Not a bad idea but you likely won't need those. The corrosion testing Kelly went through with FK was pretty extensive. @BMR Tech can add more detail.

Corrosion isn’t the issue. I had to fit boots to my toe-rods because they keep getting full of crud and making binding/grinding noises. All good if you don’t mind flushing them every month.
Why they don’t include them is beyond me.

Sponsored

 

[Burkey]

Just came in today. I was too impatient and installed my FP track shocks last week with the factory mount. I intend to install these with the full bump stop as Kelly and others have recommended. As you might be able to see below, these buy us what looks like over an inch of travel. I can't wait to feel them installed.

Just ordered 6 of these from Amazon.

Are those boots the Seals-It RERS 3 or something else?
Ordered the mounts today, pretty keen to keep them nice.

 

[baevid]

Dang looks like I received the older hardware but shouldn't be a big deal getting bigger M10-1.50 nuts at the autoparts store before installing today.

 

[Radiation Joe]

Are those boots the Seals-It RERS 3 or something else?
Ordered the mounts today, pretty keen to keep them nice.

Seals-It RERS36PK Rod End Boots

 

[Burkey]

Seals-It RERS36PK Rod End Boots

Have you confirmed that they fit? Based on what I recall of the install, I can see it being kinda tricky with the spacers BMR are using. Probably just gotta hold your mouth the right way while doing it it

 

[turnswrench]

Do we know when the next round of manufacturing and shipments will take place?

 

[Pauliejr]

Are you going to make something compatible for Adjustable shocks?

I’m running the steeda mounts but would like to be running 100% BMR

 

[Nerass]

for sale yet? TLDR

 

[BmacIL]

for sale yet? TLDR

Yes. Call BMR to order.

 

[Nerass]

Yes. Call BMR to order.

thank you!! excited af... hate my viking and stock mount combo

 

[xxchieferxx]

Installed mine tonight and they touch the big washer. I have vs forged vs14 19x11.5 on the rear with 56 offset with 305/35 mpss

@BMR Tech

 

[H1shawn1]

I had to call Lethal and demand the smaller washers for my vs forged 20x11.5 wheels. BMR will take care of you, but having to wait for new hardware is a real bummer.

 

[BMR Tech]

If any of you need the smaller washers and/or taller jam nuts please email me

[email protected]

I'll get the stuff you need shipped out, no problem.

Thanks to all of you. We are amazed at the demand for these. The amount of orders that we are seeing roll in for these is far exceeding what we anticipated.

 

[tevaburns]

My lowered, delrin cradle bushing'd, all spherical bearing'd GT finally has ZERO rear bounce/oscillation.

BMR SM760 + FR Track Shocks FOR THE WIN!

 

[DavidHuff]

Do we know when the next round of manufacturing and shipments will take place?

I sure hope soon because I am waiting to install my Viking Shocks.

Sponsored