BMR Suspension's New S550 Rear Upper SHOCK MOUNTS: SM760 - Design Finalized!

[USMCtoARMY]

Is there a time frame for the versions that will fit the steeda adjustables and other shocks that are the same?

Sponsored

 

[BMR Tech]

We went ahead and made a design change to the stop washers. Made them a smaller OD so the 20" wheel folks do not have those clearance issues with some camber.

 

[tevaburns]

We went ahead and made a design change to the stop washers. Made them a smaller OD so the 20" wheel folks do not have those clearance issues with some camber.

YAY!!!

 

[baevid]

Nice.. revision just in time before my order gets shipped out

 

[ChiTownStang26]

@BMR Tech

Any word yet on making these fit a M10x1 thread (steeda non adj) yet? Would love to have these.

 

[BmacIL]

@BMR Tech

Any word yet on making these fit a M10x1 thread (steeda non adj) yet? Would love to have these.

I posted a link to a rod end that would work with that thread pitch on the previous page.

 

[BMR Tech]

I wish FK Bearings offered the M10x1.0, but they do not.

However, they do have M10x1.25 which I have had a few people call about.

The part number for that is JFX10MF - and you would add a "T" to the end of that part# for the Teflon lined unit.

https://www.fkrodends.com/products/rod-ends/metric-series/jmx-mt-jfx-mt/

 

[USMCtoARMY]

Ill ask this again...Is there a time frame for the versions that will fit the steeda adjustables and other shocks that are the same?

 

[BMR Tech]

Ill ask this again...Is there a time frame for the versions that will fit the steeda adjustables and other shocks that are the same?

No, not at this time.

 

[USMCtoARMY]

No, not at this time.

Appreciate it. Thank you for the reply.

 

[CoolRod]

@BMR Tech ...do you have any of these in stock locally that I can pick up? I'm 5-6 miles from BMR and don't need to pay shipping costs

 

[Radiation Joe]

Just came in today. I was too impatient and installed my FP track shocks last week with the factory mount. I intend to install these with the full bump stop as Kelly and others have recommended. As you might be able to see below, these buy us what looks like over an inch of travel. I can't wait to feel them installed.

Just ordered 6 of these from Amazon.

 

[tevaburns]

Revised washers installed.

 

[BmacIL]

Just came in today. I was too impatient and installed my FP track shocks last week with the factory mount. I intend to install these with the full bump stop as Kelly and others have recommended. As you might be able to see below, these buy us what looks like over an inch of travel. I can't wait to feel them installed.

Just ordered 6 of these from Amazon.

Not a bad idea but you likely won't need those. The corrosion testing Kelly went through with FK was pretty extensive. @BMR Tech can add more detail.

 

[baevid]

I'll probably get these installed tomorrow on my Viking Warriors to see how they feel over the stock shock mounts.

Sponsored