BMR Tech
Well-Known Member
- Joined
- Sep 4, 2014
- Threads
- 168
- Messages
- 5,141
- Reaction score
- 3,691
- Location
- Tampa, FL
- Website
- www.bmrsuspension.com
- First Name
- Dion
- Vehicle(s)
- 2018 GT, 2010 GT500, 2019 F-150 5.0
- Thread starter
- #1
BMR-WAK761 Rear Camber Lockout Kit
BMR is now shipping our S550 Rear Camber Lockout kit! This WAK761 kit is designed with two locations to lock the inboard mount of your camber links in place. We provide an INBOARD position for those who are utilizing the most camber you can get, and an OUTBOARD position that is most commonly used by straight-line enthusiasts, or those who simply want more contact patch to the surface during WOT. We have found that maximizing contact patch allows for better traction and less wheel-hop.
Additionally, BMR goes above and beyond and provides you with new Grade 12.9 Bolts and Class 12 nuts for a MUCH higher 105ftlb torque specification. This ensure the system is LOCKED SOLID as it provides much more clamp in comparison to the OE factory torque spec of 85ftlbs.
The WAK761 kit is recommended for stock, aftermarket fixed and aftermarket adjustable camber links. Check out our new innovative UCA762 Adjustable Camber links as a great addition to these
BMR has experienced camber slip on several of our project vehicles, so we developed this system to eliminate that slip and provide you with a more consistent alignment during high loads in cornering or launching at the drag-strip.
*All hardware provided for installation. ADDITIONAL HARDWARE provided for 1000+hp drag strip or competition Road Course applications.
These kits have been tested on the street, road course and drag-strip with GREAT success!
Price: $59.95 - Shipping NOW!
BMR is now shipping our S550 Rear Camber Lockout kit! This WAK761 kit is designed with two locations to lock the inboard mount of your camber links in place. We provide an INBOARD position for those who are utilizing the most camber you can get, and an OUTBOARD position that is most commonly used by straight-line enthusiasts, or those who simply want more contact patch to the surface during WOT. We have found that maximizing contact patch allows for better traction and less wheel-hop.
Additionally, BMR goes above and beyond and provides you with new Grade 12.9 Bolts and Class 12 nuts for a MUCH higher 105ftlb torque specification. This ensure the system is LOCKED SOLID as it provides much more clamp in comparison to the OE factory torque spec of 85ftlbs.
The WAK761 kit is recommended for stock, aftermarket fixed and aftermarket adjustable camber links. Check out our new innovative UCA762 Adjustable Camber links as a great addition to these
BMR has experienced camber slip on several of our project vehicles, so we developed this system to eliminate that slip and provide you with a more consistent alignment during high loads in cornering or launching at the drag-strip.
*All hardware provided for installation. ADDITIONAL HARDWARE provided for 1000+hp drag strip or competition Road Course applications.
These kits have been tested on the street, road course and drag-strip with GREAT success!
Price: $59.95 - Shipping NOW!
Sponsored