Best size tire for a 20x10 et 38?

[Braski]

I'm mostly curious about up front. I know I have plenty of room in the rear. The wheels are rovos pretoria 20x10 et 35 square. I'm trying to run no spacer. The wheels clear my pp brakes but I did have to remove my dust cap to get the center cap on. I have a good bit of space between rim and strut "atleast a fingers width". I would think a 275/35-20 would easily fit but I think there a little skinny for a 10 in rim. Any ideas of how a 285/35-20 or a 285/30-20 would fit? I might try to find a used one to mount just to test before I pull the trigger on new ones. Thanks!

Sponsored

 

[Roh92cp]

It depends on the tire brand Nitto Nt555's run wide compared top others. I had 275/35 Nitto's on my 20x10" Niche wheels and the fit flush.

 

[ModularKid21]

Both 285/30 and 285/35 will fit but a 275/35 will be closer to the diameter of the factory wheel. I plan on purchasing 19x10’s with a +35 offset and plan on mounting 295/35 all around. To me, it more depends on how low you are or plan on being. There was a thread that was just made a little while ago with a few pictures of the tires sizes you mentioned

https://www.mustang6g.com/forums/threads/285-35-r20-square.109315/

 

[Braski]

Both 285/30 and 285/35 will fit but a 275/35 will be closer to the diameter of the factory wheel. I plan on purchasing 19x10’s with a +35 offset and plan on mounting 295/35 all around. To me, it more depends on how low you are or plan on being. There was a thread that was just made a little while ago with a few pictures of the tires sizes you mentioned

https://www.mustang6g.com/forums/threads/285-35-r20-square.109315/

I'm as low as I'm gonna go, Bmr sp080's!

 

[ModularKid21]

Gotcha. I’d probably go with 275/35 or 285/35

Sponsored