Best GT500 Style Spoiler?

[Rapid Red]

So the question becomes

Is the GT500 oem piece completely solid all the way through? I'll likely never have one to drill into

I didn't realize spoilers were solid until I saw people complain here about it. You know this one does have all the holes for the screws, not sure what would stop a determined individual from filling the insides with something to make it more solid.

Chashing the 500 spoiler using Fords part number: KR3Z-6344210-AA
Have a look at this, the spoiler bolts together, looks solid. Notice the hardware used

https://lmr.com/item/LRS-6344210AB/mustang-performance-pack-rear-spoiler-15-19

Sponsored

 

[geep81]

So the question becomes



Chashing the 500 spoiler using Fords part number: KR3Z-6344210-AA
Have a look at this, the spoiler bolts together, looks solid. Notice the hardware used

https://lmr.com/item/LRS-6344210AB/mustang-performance-pack-rear-spoiler-15-19

That is a different spoiler! Looks like PP2 to me.

 

[Rapid Red]

That is a different spoiler! Looks like PP2 to me.

Not even close

 

[racingandfishing]

These are the GT500 style from LMR, but they are also one piece and ABS which is very likely hollow.

https://lmr.com/item/LRS-19GT350G/mustang-gt500-style-spoiler-gloss-black-15-20

https://lmr.com/item/LRS-19GT350M/mustang-gt500-style-spoiler-matte-black-15-20

 

[boos550t]

I’m pretty sure my CF spoiler is Just a hollow fiberglass spoiler with a small CF layer on top of it.

But I’ve never had problems with it at all so i don’t mind it being hollow. Granted I’d rather have a solid wing than a hollow wing but I’d also rather not pay upwards of $800 for a spoiler either.

 

[racingandfishing]

Hoping that at some point the OEM one will become a Ford accessories product like the original GT350 track pack spoiler. When they did that, the price was like cut in half.

 

[MNstang]

Not even close

Which spoiler do you think you posted the link to? I'm seeing it as a PP1 spoiler too -?

 

[Rapid Red]

Which spoiler do you think you posted the link to? I'm seeing it as a PP1 spoiler too -?

It is 4 piece, 3 bolt to the wing. 2 ends & center support

PP2

 

[MNstang]

The spoiler in your link is a PP1 spoiler - same one I have on my 2019...

 

[geep81]

Not even close

Ok it was PP1. I would say that's pretty close guess. I didn't realize the PP2 was such a small spoiler, looks closer to the blackout package spoiler my car came wither.

Either way this GT500 spoiler the discussion is about is miles cooler than all of them!

 

[Rapid Red]

The spoiler in your link is a PP1 spoiler - same one I have on my 2019...

Good looking part, better then the ebay jobs for sure. Very crisp clean sharp lines.

 

[MNstang]

Good looking part, better then the ebay jobs for sure. Very crisp clean sharp lines.

I agree - however, I will be pulling mine off and installing the Ikon GT500 spoiler

 

[BlownGP]

@Justin @BlownGP Does your spoiler wrap over the rear of the deck lid like the OEM one? Or do they sit completely flat? Do you guys have any more pics from different angles? I'm trying to find the closest match to the OEM design possible.

Thanks!!

Sorry for the late reply, don't get on here much. When I do I post whore then leave for a few days. lol


But mine sits flush, looking at your pic. Mind does not wrap around the trunk. Didn't know the OEM did that.

 

[Polski]

Anybody got the Vicrez spoiler?

https://www.vicrez.com/vicrez-carbo...ng=nav_top-search_mustang&search=Ford Mustang

 

[geep81]

Anybody got the Vicrez spoiler?

https://www.vicrez.com/vicrez-carbon-fiber-rear-wing-spoiler-gt500-style-vz102133-ford-mustang-2015-2016-2017-2018-2019-2020?tracking=nav_top-search_mustang&search=Ford Mustang

I don't like how that one doesn't wrap around the lip of the trunk like the stock one.

Sponsored