Best belt for P1sc HO at 12psi??

[yote41]

i have the regular procharger belt on my car now with p1sc ho kit and 3.5 pulley. I am installing 18 manifold amd a 3.4 pulley next week.i want to change the belt while i am at it. Is the gates green hd belt still the way to go?

Sponsored

 

[SolarFlare]

Being that you’re a 6rib I’d say you need all the best you can get at those smaller pulley sizes. I’d go Gates RPM. If it was an 8rib a green would be good

 

[yote41]

I did get a griptec pulley as well

 

[yote41]

Hd or rpm?

 

[ahl395]

RPM belts are touchy if the tension isn't right and will snap. IMO especially being a shared belt I wouldn't chance it, or you'll be stranded if it fails. Not worth the headache IMO

 

[whatsup62]

I ran the RPM on the HO kit when I had it. The weak link on the HO kit is you are using the factory tensioner. Doesn't matter what belt you run if the stock tensioner wont hold it.

 

[Jackson1320]

You should have no problems with the rpm or the green on your setup and a 3.4 griptech

Sponsored