UncleJunior
New Member
- Thread starter
- #1
What's up guys , I need to order a new belt for my Paxton 3.6 pulley. are you guys using the 103 inch ? Or are you using a smaller belt ? Also what brand ? Thx
Sponsored
I'm still using the stock 103" belt for my 3.33, and it would also fit a 3.125 on the tightest tensioner setting. This is also the same belt I used on my 3.6. You can step down to a 100" on the 3.33 and smaller if you wanted to.
Jesus dude just make 1 thread with all your 3.33/belt/boost questionsthe 3.33 with a 100.5 belt, which hole are you supposed to use? trying to belt down because for some reason not getting past 10-11 psi with the 3.33
Just searching for info bud, like your response, no input. so i will continue asking until someone offers knowledge just trying to solve a problem.Jesus dude just make 1 thread with all your 3.33/belt/boost questions
Sometimes you gotta be a little patient. Ask your question and info will come, no need to mindlessly update a bunch of 1-2 year old threads.Just searching for info bud, like your response, no input. so i will continue asking until someone offers knowledge just trying to solve a problem.
Sometimes you gotta be a little patient. Ask your question and info will come, no need to mindlessly update a bunch of 1-2 year old threads.
Looks like you can use 100 or 100.5…..part number k061000RPM
your going to want the K060997HD which 100.25" with the grip tech 3.33". And it will be damn tight but it works flawlessly for me. Unsure of the pulley bolt hole but I can get you a pic when I have a minute this weekend. Order the belt and Ill have you a pic for when the belt comes in for you.
your going to want the K060997HD which 100.25" with the grip tech 3.33". And it will be damn tight but it works flawlessly for me. Unsure of the pulley bolt hole but I can get you a pic when I have a minute this weekend. Order the belt and Ill have you a pic for when the belt comes in for you.