Belt size for Paxton with 3.6 pulley

[UncleJunior]

What's up guys , I need to order a new belt for my Paxton 3.6 pulley. are you guys using the 103 inch ? Or are you using a smaller belt ? Also what brand ? Thx

Sponsored

 

[NCmx881]

I think it's actually a 102.5 " from what I recall that I'm running

 

[kcc0521]

I ran the stock belt ( the one that came in the Paxton kit) in the same hole as required for the 3.8 pulley.

 

[Rothgray]

I'm still using the stock 103" belt for my 3.33, and it would also fit a 3.125 on the tightest tensioner setting. This is also the same belt I used on my 3.6. You can step down to a 100" on the 3.33 and smaller if you wanted to.

 

[Whitltng]

18/19 v3jt 3.6 kit brings 102.
Recommend 2nd hole for the tensioner.
Sure you can use the same belt when upgrading the pulley let's say 3.3 just move the tensioner to the last hole

 

[s550_kratos]

I'm still using the stock 103" belt for my 3.33, and it would also fit a 3.125 on the tightest tensioner setting. This is also the same belt I used on my 3.6. You can step down to a 100" on the 3.33 and smaller if you wanted to.

the 3.33 with a 100.5 belt, which hole are you supposed to use? trying to belt down because for some reason not getting past 10-11 psi with the 3.33

 

[SolarFlare]

the 3.33 with a 100.5 belt, which hole are you supposed to use? trying to belt down because for some reason not getting past 10-11 psi with the 3.33

Jesus dude just make 1 thread with all your 3.33/belt/boost questions

 

[s550_kratos]

Jesus dude just make 1 thread with all your 3.33/belt/boost questions

Just searching for info bud, like your response, no input. so i will continue asking until someone offers knowledge just trying to solve a problem.

 

[SolarFlare]

Just searching for info bud, like your response, no input. so i will continue asking until someone offers knowledge just trying to solve a problem.

Sometimes you gotta be a little patient. Ask your question and info will come, no need to mindlessly update a bunch of 1-2 year old threads.

Looks like you can use 100 or 100.5…..part number k061000RPM

 

[s550_kratos]

Sometimes you gotta be a little patient. Ask your question and info will come, no need to mindlessly update a bunch of 1-2 year old threads.

Looks like you can use 100 or 100.5…..part number k061000RPM

I have that belt the 100.5 ,
Gates K061000HD FleetRunner Micro-V

Right now that idler is in second hole left to right, personally looking at it does not seem like its happening lol so ive gotten recommendations to move on hole to the right, 3rd hole left to right. just trying to establish what it needs to be before i go trying to force the incorrect stuff.

 

[SolarFlare]

On the second hole my buddy uses k061020rpm. He says when he tries to use the 3rd whole and a smaller belt he breaks the belt.

 

[SolarFlare]

He’s a gen 3. Most people say it’s difficult to get on but that’s normal.

 

[JDUBU]

your going to want the K060997HD which 100.25" with the grip tech 3.33". And it will be damn tight but it works flawlessly for me. Unsure of the pulley bolt hole but I can get you a pic when I have a minute this weekend. Order the belt and Ill have you a pic for when the belt comes in for you.

 

[s550_kratos]

your going to want the K060997HD which 100.25" with the grip tech 3.33". And it will be damn tight but it works flawlessly for me. Unsure of the pulley bolt hole but I can get you a pic when I have a minute this weekend. Order the belt and Ill have you a pic for when the belt comes in for you.

I appreciate all of you, when i say snug that thing is on there lol. i used the 100.5 on the third hole left to right. will datalog and update info in case anyone in the future is searching around for the same answers

 

[s550_kratos]

your going to want the K060997HD which 100.25" with the grip tech 3.33". And it will be damn tight but it works flawlessly for me. Unsure of the pulley bolt hole but I can get you a pic when I have a minute this weekend. Order the belt and Ill have you a pic for when the belt comes in for you.

Just wondering if you got a chance to check what pulley hole your running.again I'm on 3rd hole with 100.5 and apparently I'm still not gaining boost complete loss for what to do or correct or even check

Sponsored