Attempting to send it with P1x

[Jaywebs]

Hey guys. 1st time posting here. Im sure this has already been covered but please dont chastise me too much. So I have a 19 PP1 with a stage 2 p1x procharger system, kooks uncatted headers, fore triple pump return style fuel system, id1300 injectors and tuned for e85. origally before the supporting mods, the procharger default pulley was a 4.5 on a 93 tune. Car made 597 wheel. Now pulling down to a 4 inch with all these supporting mods, does anyone have a guestimate of what type of power it will make now? Also curious if anyone knows if this system can make 900 wheel and if so what size pulley/mods do you have. Thanks guys

Sponsored

 

[TRP45ACP]

I am running a similar system; however, running a D1X. If you run a 3.875 pulley, you would max the charger at 7700 rpm. I would pulley accordingly based on your use of the car.

 

[Jackson1320]

I am running a similar system; however, running a D1X. If you run a 3.875 pulley, you would max the charger at 7700 rpm. I would pulley accordingly based on your use of the car.

Only one problem. The p1x doesn’t max out at 62,000

 

[Jackson1320]

Hey guys. 1st time posting here. Im sure this has already been covered but please dont chastise me too much. So I have a 19 PP1 with a stage 2 p1x procharger system, kooks uncatted headers, fore triple pump return style fuel system, id1300 injectors and tuned for e85. origally before the supporting mods, the procharger default pulley was a 4.5 on a 93 tune. Car made 597 wheel. Now pulling down to a 4 inch with all these supporting mods, does anyone have a guestimate of what type of power it will make now? Also curious if anyone knows if this system can make 900 wheel and if so what size pulley/mods do you have. Thanks guys

Yes it can make 900whp+ And you are 850whp+ If tuned correctly

 

[Jaywebs]

Thank you Jackson 1320. Your correct. The blower doesn't max out at 62k. Contacted procharger directly yesterday, and they claim that the smallest pulley available for my application is 3.5. Curious what numbers that would make if I can ensure no belt slippage.

 

[Jackson1320]

Thank you Jackson 1320. Your correct. The blower doesn't max out at 62k. Contacted procharger directly yesterday, and they claim that the smallest pulley available for my application is 3.5. Curious what numbers that would make if I can ensure no belt slippage.

1000whp+

 

[TRP45ACP]

Yes, I was thinking 62k from the D1x that’s I’ve been in the middle of installing/tuning. Procharger ran their orange pumpkin car on a p1x to 900+ for a tuning session. There is a YouTube video with the detail.

 

[Jackson1320]

I run a p1x carb legal kit and make over 900

 

[Jaywebs]

I run a p1x carb legal kit and make over 900

What size pulley are you on? What about the rest of your setup?

 

[SolarFlare]

I have a gen 2 with a P1X on a 4.0 pulley. Enough to run 9.30s at 150 on mediocre weather.

Sponsored