Anyone with a GT350 going to swap out phasers and lash adjusters?

[olaosunt]

If you are building from scratch those are a no brainer.
They are cheaper than the stock Gen 2 phasers .
I have set to complete one of my 5.2 builds
$304 retail
stock are $10 a piece =$320

Sponsored

 

[olaosunt]

I bought the full M-6004-A50R kit and I'll be installing these on a 5.2 cross plane crank build, starting from scratch, stock Gen 2 heads, L&M intake cams, stock exhaust, PAC springs, titanium retainers.. Will report results.

Good choice . That kit is only the phasers .
still need chains , tensioners and guides .
There is a kit that includes the phasers and all you need ... price reduced to $770. It’s nice kit for the money .
when I added all the individual part prices it was more .
Only thing is you would probably want the stronger MMR or accufab secondary chains .
https://www.levittownfordparts.com/sku/m-6004-a5015b.html

 

[windsor]

Good choice . That kit is only the phasers .
still need chains , tensioners and guides .
There is a kit that includes the phasers and all you need ... price reduced to $770. It’s nice kit for the money .
when I added all the individual part prices it was more .
Only thing is you would probably want the stronger MMR or accufab secondary chains .
https://www.levittownfordparts.com/sku/m-6004-a5015b.html

oops...that kit is what I bought actually. Two wrong quotes today for me. I paid $755.
Will I still need upgraded secondary chains?

 

[olaosunt]

oops...that kit is what I bought actually. Two wrong quotes today for me. I paid $755.
Will I still need upgraded secondary chains?

Nice !
You might as well since you are upgrading everything else .

Some say the accufab chains are better than MMR .

 

[windsor]

Nice !
You might as well since you are upgrading everything else .

Some say the accufab chains are better than MMR .

Ordered.

 

[Deca]

Old thread- but how do these FP phasers compare to the MMR cam adjusters/phaser deletes?

 

[stanglife]

On a non-drag raced, street car with stock cams - I cant see a reason to lock these down..

 

[honeybadger]

Old thread- but how do these FP phasers compare to the MMR cam adjusters/phaser deletes?

https://www.mustang6g.com/forums/threads/anyone-run-locked-out-vct.150060/post-3196546

Not a deadstock motor, but made similar to stock with cat delete, e85, and a tune

I loved the way the engine drove on the race track. Also sounded mean as hell.





But it was objectively slower in the midrange

 

[Deca]

Cool- thanks. It’s just that MMR offers this set that includes them - now a lot clearer abt pros/cons!

 

[Deca]

oops...that kit is what I bought actually. Two wrong quotes today for me. I paid $755.
Will I still need upgraded secondary chains?

Does everything from that kit fit our GT350? the steel 302 tensioner for instance? When I asked Ford Performance I got the short reply: " I do not believe they will." But I don't get a warm a fuzzy feeling from these service reps...thanks!

 

[honeybadger]

Does everything from that kit fit our GT350? the steel 302 tensioner for instance? When I asked Ford Performance I got the short reply: " I do not believe they will." But I don't get a warm a fuzzy feeling from these service reps...thanks!

I use the steel 302 tensioner in my engines

Sponsored