Anyone have the offset of the base Mach1 wheels?

[Dave2013M3]

Thanks in advance.

Sponsored

 

[Mikepol2]

Hi Dave, just bought a set, here you go...

Fronts weigh about 33 lbs and rears 35 lbs, but that's with wheel weights installed so actually a little less than that.

Fronts are 19 x 9.5 +40, and rears are 19 x 10 +52.5.

 

[Dave2013M3]

Hi Dave, just bought a set, here you go...

Fronts weigh about 33 lbs and rears 35 lbs, but that's with wheel weights installed so actually a little less than that.

Fronts are 19 x 9.5 +40, and rears are 19 x 10 +52.5.

Thanks bro!! I would imagine the PP2 look wheels available for the Mach are probably the same offset. Jeez they are boat anchors.

 

[Charlemagne]

I can confirm the PP2 style optional magnetic wheels have same offsets, 9.5 x 19 ET40.0, 10.0 x 19 ET52.5.

The distance between the tyre edge and the shock absorber is less than 1 cm, I can't put my finger there. Pretty tight there. It's good that HP wheels have smaller offset and thus poke out more, otherwise they wouldn't fit there.

According to wheel offset calculator they'd be 3 mm further out from shock absorber and 29 mm more out from the wheel well.

The rear wheels have about 2.5 cm space between tyre edge and shock absorber so it's good. With HP wheel there's 13 mm less space but it still fits. And outer edge of rim is 13 mm more out from the wheel well.

Sponsored