Any GT Performance Pack convertibles out there

[MaskedRacerX]

Are those wheels the SVE GT7's from LMR? I want the same wheels just in the graphite color.

Those (assuming you're talking to me) are MRR M600 in satin black (also available in gunmetal). 20x10, 20x11 with 285/35, 305/35 tires (that nice and flush, also have the same front-to-rear ratio as factory).

https://www.mrrwheels.com/collections/wheels/products/m600

Where's that yellow vertical spoiler? Or some call it a surf board?

I hit 175 one day and it shot off into space ...

Sponsored

 

[I Bleed Ford Blue]

Those (assuming you're talking to me) are MRR M600 in satin black (also available in gunmetal). 20x10, 20x11 with 285/35, 305/35 tires (that nice and flush, also have the same front-to-rear ratio as factory).

https://www.mrrwheels.com/collections/wheels/products/m600

Those look just like the GT7's from LMR Don't know who actually makes them, MRR or SVE but it's obvious they make both.

https://lmr.com/products/mustang-sve-gt7-wheels-15-17

 

[MaskedRacerX]

Those look just like the GT7's from LMR Don't know who actually makes them, MRR or SVE but it's obvious they make both.

https://lmr.com/products/mustang-sve-gt7-wheels-15-17

Possibly, but there's a few companies that make this same style, PK Auto has a P51, that's another one (though it's slightly different with a small stepped lip). I think the design got popular and several aftermarket companies produced a wheel.

FWIW, it's actually a knock off of the Ford GT wheel

 

[barron64]

Here are a couple of pics of my 2018 PP1 w/6sp manual:

 

[Rippermac]

The more I see a spoiler the more I want one...

 

[jimbabwe]

2016 GT PP checking in. Loving this car more and more every time I drive it

 

[Rippermac]

Run Forest ...run

 

[trojannemo]

Beautiful car and great picture!

 

[canyon ed]

Has anyone tried to convert a Auto into a P/P convertible? I am gathering up the parts now. Need some advice on how to install the pp center stack gauges and if the stock wiring has that wiring in that area.

 

[I Bleed Ford Blue]

Has anyone tried to convert a Auto into a P/P convertible? I am gathering up the parts now. Need some advice on how to install the pp center stack gauges and if the stock wiring has that wiring in that area.

The only way you will know if it has the wiring there is pull the trim panel off and look. There is videos on YouTube on how to get them off to swap out the gauges.

The rest of the PP is just bolt on stuff, some of it expensive, but bolt on none the less. I would think that if the wiring is there, then you can enable the gauges with ForScan

 

[MexicanBatman]

Only every single mustang convertible in Australia...


Mine

2018

 

[canyon ed]

The only way you will know if it has the wiring there is pull the trim panel off and look. There is videos on YouTube on how to get them off to swap out the gauges.

The rest of the PP is just bolt on stuff, some of it expensive, but bolt on none the less. I would think that if the wiring is there, then you can enable the gauges with ForScan

So you think the wiring is there then to plug and play?

 

[I Bleed Ford Blue]

I don't know for sure, but I would say there is a 75% chance it is.

 

[canyon ed]

I don't know for sure, but I would say there is a 75% chance it is.

Well I hope someone has tried it before. If anyone has please post if the stock wiring is there for the gauges. thanks

 

[sdiver68]

Mine!

Sponsored