6.35 @ 116.61 1.51 60ft ESS supercharged 18

[Brad1810r80]

Mechanical Boost gauge is reading correct , e30 I’m running 22 deg of timing. You can run 17-18 degs on 93 with 10psi.
My car is probably about 125bs lighter than that. Forgestars , removing seats.

Can’t make 960 hp on injectors and bap.

Let's say 3950 running weight combined? 660' @ 116.6mph is about 960hp +/-.

Your boost gauge is either reading 2.5-3psi too low, or there's unicorns under the hood.

E30 fuel would normally not resist knock above 17 degrees of spark advance at that power level.

Where's the magic here?

Sponsored

 

[Cory S]

Mechanical Boost gauge is reading correct , e30 I’m running 22 deg of timing. You can run 17-18 degs on 93 with 10psi.
My car is probably about 125bs lighter than that. Forgestars , removing seats.

Can’t make 960 hp on injectors and bap.

I just hope you know you have a unicorn here. 22° of advance on E30 running almost 117mph in 660'........ WTF LOL.......

 

[Brad1810r80]

I’ll take it, I want to see more of the g3 kits on the track or some 60-130 times. They do run good for the boost it runs. Only thing I can think of is it doesn’t take as much to drive the ess supercharger as a another brand . But who knows.

I have a 115mm pulley should add 1.5 - 2lbs more boost . I’d like run a 6.0 @ 118-119

I just hope you know you have a unicorn here. 22° of advance on E30 running almost 117mph in 660'........ WTF LOL.......

 

[JeremyPro5.0]

IM STILL LOOKING AT THE TEMP -- 61 DEGREES.

I HATE YOU. :0)

 

[Brad1810r80]

it’s 20 here today so don’t hate too much.

IM STILL LOOKING AT THE TEMP -- 61 DEGREES.

I HATE YOU. :0)

 

[JeremyPro5.0]

it’s 20 here today so don’t hate too much.

It was 45-50 here yesterday, strange February.
Today temps going down to 15 and 1-3 inches of ice predicted.

 

[Brad1810r80]

New PB today

 

[deanm11]

Through the cats, only E30, very impressive. You're hooking pretty solid too. Well done. At this temp, I'd have to say you're putting 850hp to the tire.

 

[Brad1810r80]

next mod is getting rid of cars and the factory 2 1/4 factory connect. Make it all 3”

Through the cats, only E30, very impressive. You're hooking pretty solid too. Well done. At this temp, I'd have to say you're putting 850hp to the tire.

 

[deanm11]

You may have said elsewhere but:

3.55s? Stock driveshaft and axles ?

 

[Brad1810r80]

3.55's , QA1 carbon driveshaft and stock axles. I'm slowly making my way to upgrading axles but dang its all $$$. So I have a couple $25 stock ebay axles just in case I break one in the mean time.

You may have said elsewhere but:

3.55s? Stock driveshaft and axles ?

 

[brent_G]

That's moving, nice work!

 

[BuzzNectar]

New PB today

DAMN that runs good!!!

 

[Brad1810r80]

Thank you sir, I've really enjoyed this kit.

DAMN that runs good!!!

 

[Kennysum1]

Once I get mine back up and going we will have to throw down here at the Huntsville Dragway. See you out there!

Sponsored