Sold: Canada - Ontario 4" to 8" Big Screen Upgrade w/NAV 2019-2021 $800

[boogs]

4" to 8" Big Screen Radio conversion for 2019-2021 Mustangs.

This is plug-and-play for 2019-2021 Mustangs.

Up for sale are all of the parts needed to upgrade your Mustangs 4" screen to 8" touch screen with NAV. These were bought from HextallS550 on the forum. After installation the radio is fully functional but you will need a few programming lines changed to enable the drive mode toggle - HextallS550 can do the programming remotely for a small fee:

https://www.mustang6g.com/forums/threads/sync-3-swap-its-all-in-here.82973/

I'm also including the OBDLINK EX that is needed to connect a laptop to the cars CPU for the programming.

THIS IS EVERYTHING YOU NEED FOR THE CONVERSION.

$800 USD OBO

Located in Kitchener, Ontario Canada but I work in Mississauga so can arrange for pickup at either location. I can also ship at buyers expense

Sponsored

 

[siapa0]

I am interested,did you have this installed on your car?
I have a 2019 auto with PP1 so it should work fine i assume.
Thanks
Alex

 

[MikeDawg5oh]

Is the APIM included? Asking since you don’t have it pictured and not mentioned in the post.

 

[boogs]

Is the APIM included? Asking since you don’t have it pictured and not mentioned in the post.

It's attached to the rear of the screen.

 

[boogs]

This is the unit as received, prior to installation.

 

[6Stang]

Would this also be plug-and-play for a 2017 V6 base with 4.2" screen? I'm guessing I'll need a harness?

Thanks

 

[1004ron]

Would this also be plug-and-play for a 2017 V6 base with 4.2" screen? I'm guessing I'll need a harness?

Thanks

You will need the custom harness, two USB cables, USB media hub, and GPS antenna, in addition to the parts in the photos.

@boogs mentions that it includes everything needed for the upgrade, so quite possible that these items are included.

 

[boogs]

Would this also be plug-and-play for a 2017 V6 base with 4.2" screen? I'm guessing I'll need a harness?

Thanks

This conversion as pictured works for 2019-2021 Mustangs. For 2015-2018, you'll need a harness (as 1004ron mentioned) and APIM.

Sponsored