315 MT EtstreetR Fitment

[DeadSpool]

*I seen the post a few threads down but didn’t want to hijack it.

The tracks around here are usually just mediocre prepped and I’m planning on turning it up more often this season hence wanting a bigger tire. Anyone here running the exact same setup as me and not having any rubbing issues without spacers? GT350 springs, crusaders and Forgestar 17x10” D5 beadlocks? Rest of mods in sig.

Curious on the differences I’ll notice vs the 305 as well. 6r80 w/3.15 gears

Sponsored

 

[15GTPP]

I’m not too sure about gt350 springs but I know you can run 315/50’s with stock gt/gtpp rear springs without spacers. The 315/50 I believe is a 29.5in tire so it turned my 3.15’s into a 2.93-2.95. I wouldn’t be able to tell you the difference it made since I have only run this size. Definitely looks good back there as well.

 

[DeadSpool]

I’m not too sure about gt350 springs but I know you can run 315/50’s with stock gt/gtpp rear springs without spacers. The 315/50 I believe is a 29.5in tire so it turned my 3.15’s into a 2.93-2.95. I wouldn’t be able to tell you the difference it made since I have only run this size. Definitely looks good back there as well.

Thanks, I’m not too sure if the stock springs are the same height either. Wow that ratio would sure make my first gear run out nice. I bet, have a pic from the rear?

 

[15GTPP]

Here’s one. There’s a thread on these tires a little down that has some good pics.

 

[DeadSpool]

Here’s one. There’s a thread on these tires a little down that has some good pics.

Looks good. Ya I seen that one, just curious to see it from the back.

Sponsored