2021 Mustang Mach 1 Gets Final Styling Changes Before Production

[Elvis67]

They could also have put turn signals in the hood like my 2016 has. It is gimmicky but Ford put it in that year only.

Don't forget 1967

Sponsored

 

[Elvis67]

I really liked that on my '16. But you could only see the one on the driver side

They have kits for 18 till current now

 

[cactus_kid]

I'd sooner have better breathing hood vents .............

 

[Hi-PO Stang]

I am pleased the Ford stylist strive for perfection. The appearance of the latest Mustangs is greatly improved. One has to see the newer Mustangs in person to appreciate how nice the new Mustangs look. Pictures do not give enough detail of how the Mustangs look now. Thanks to the Ford stylist. It is as if the Stylist actually read this forum to give us what we want.

 

[derklink]

They have kits for 18 till current now

Cool, I didn't know about these. Thank you for sharing. Will see if they block the heat extractor functionality, though I think on the '18s and up, only one side is functional anyway.

 

[derklink]

Cool, I didn't know about these. Thank you for sharing. Will see if they block the heat extractor functionality, though I think on the '18s and up, only one side is functional anyway.

Just looked them up and seems like they're just LEDs that connect to the existing heat extractors and nothing gets blocked. Think I will order some.

 

[derklink]

Mhmmm....LEDs are held in place with adhesive tape. Not a huge fan of this concept, especially since hot air is traveling that way. I've never "glued" anything onto my car, trust nuts and bolts more, but could be fine.

 

[GreenS550]

Don't forget 1967

My 1970 Roadrunner had them too:

 

[Sergeant Gearhead]

I don't see any differences between the stripes.

 

[WD Pro]

I don't see any differences between the stripes.

It's in this area :

On the yellow car, the stripes now finish with what appears to be a straight / almost vertical profile.

The previous version on the blue car finished with a curved profile to suit the edge of the body work (be it a little poorly mismatched) :

Maybe its just the photo and its not shown well, but I think the better option would have been the original, but with the radius tracing the bodywork profile and the gaps reduced to match the gap between the upper and lower decal.

WD

 

[GreenS550]

Wider, too. The updated stripe looks a bit wider up to the body crease instead of below it.

 

[Elvis67]

Mhmmm....LEDs are held in place with adhesive tape. Not a huge fan of this concept, especially since hot air is traveling that way. I've never "glued" anything onto my car, trust nuts and bolts more, but could be fine.

I had them on my modified 15 ecoboost hood ..they held just fine with the adhesive tape..definitely use the 3m adhesive Promoter.

 

[Sergeant Gearhead]

It's in this area :

On the yellow car, the stripes now finish with what appears to be a straight / almost vertical profile.

The previous version on the blue car finished with a curved profile to suit the edge of the body work (be it a little poorly mismatched) :

Maybe its just the photo and its not shown well, but I think the better option would have been the original, but with the radius tracing the bodywork profile and the gaps reduced to match the gap between the upper and lower decal.

WD

Thanks for the confirmation! I'm personally fine with either, because like I said that's not something I would notice on a daily basis.

-SG

 

[cactus_kid]

Cool, I didn't know about these. Thank you for sharing. Will see if they block the heat extractor functionality, though I think on the '18s and up, only one side is functional anyway.

On my '20 GT, both are functional. I can live w/o the lights thank you. They are tacky IMHO

 

[derklink]

On my '20 GT, both are functional. I can live w/o the lights thank you. They are tacky IMHO

I have the same opinion on side stripes.

Sponsored