Mazman
Well-Known Member
As per specs the springs are exactly the same.My tip is there are two sets of springs for the Mach 1.
The photos so far of the non handling pack Mach 1's have a gap to tyre guard of at least 1 to 1.5 inch. This is with 40 series tyres with a total diameter of 27 inches.
The multi spoke Handling Pack rims with 30 series tyres (with 26.2 front and 26.4 rear diameters) will have a huge tyre to guard gap if the spring height is left unchanged.
I'm sure the Handling Pack version of the Mach 1 will have lower springs with different part numbers to the the non handling pack Mach 1's.
The differences hardware wise HP/none HP in the suspension is the rear sway bar according to the specs available.
The fender gap will be bigger on the HP. On the rear 315/30=671.6mm compared to 275/40=702.6mm is a 31mm diff in diameter.
Sponsored
Last edited: