2021 Mach 1 wheel offsets for the HP wheels?

[Dave2013M3]

Are they GT350 or are they PP2? If answered before so sorry...

Sponsored

 

[Mikepol2]

Very close to PP2 but not exact because of the rear tires being wider. All three are 10.5" front and 11" rear.

GT350 wheels are +30 front, +62 rear, 295/35-19 and 305/35-19.

PP2 wheels are +24 front, +48 rear, 305/30-19 square.

Mach HP wheels are +24 front, +52 rear, 305/30-19 and 315/30-19.

 

[Davy_Baby9]

Very close to PP2 but not exact because of the rear tires being wider. All three are 10.5" front and 11" rear.

GT350 wheels are +30 front, +62 rear, 295/35-19 and 305/35-19.

PP2 wheels are +24 front, +48 rear, 305/30-19 square.

Mach HP wheels are +24 front, +52 rear, 305/30-19 and 315/30-19.

Do you know what the Ford part numbers are for the Mach HP wheels?

 

[Mikepol2]

Do you know what the Ford part numbers are for the Mach HP wheels?

Sorry I don't. Find an HP car listed for sale and send the VIN to @LevittownFordParts and ask for the part numbers, they'll give you the numbers and good prices.

 

[TonyNJ]

Very close to PP2 but not exact because of the rear tires being wider. All three are 10.5" front and 11" rear.

GT350 wheels are +30 front, +62 rear, 295/35-19 and 305/35-19.

PP2 wheels are +24 front, +48 rear, 305/30-19 square.

Mach HP wheels are +24 front, +52 rear, 305/30-19 and 315/30-19.

This is a nice information post. I'd like to see the whole mustang line up like that, top to bottom.

 

[Dave2013M3]

Very close to PP2 but not exact because of the rear tires being wider. All three are 10.5" front and 11" rear.

GT350 wheels are +30 front, +62 rear, 295/35-19 and 305/35-19.

PP2 wheels are +24 front, +48 rear, 305/30-19 square.

Mach HP wheels are +24 front, +52 rear, 305/30-19 and 315/30-19.

Mike I thought the GT350 was 52MM rear? I am not sure though.

 

[samstrano]

My set of PP2 wheels are 24 and 52. The Shelby's are 30 and 62 I don't know why the difference. But there's no difference between my set of PP2s and the handling pack Mach 1 wheels in terms of offset.

 

[Mikepol2]

Mike I thought the GT350 was 52MM rear? I am not sure though.

I ran a set on my 2018 and have a note in my records on the +30 / +62 but could be wrong.

My set of PP2 wheels are 24 and 52. The Shelby's are 30 and 62 I don't know why the difference. But there's no difference between my set of PP2s and the handling pack Mach 1 wheels in terms of offset.

Are your PP2 wheels OEM or Ford Performance? I had a set of OEM PP2 wheels and had a record of them being +24 / +48. The 4.5mm difference makes sense since the PP2 rear tires were 305 and the HP are 315.

 

[D Bergstrom]

Are your PP2 wheels OEM or Ford Performance? I had a set of OEM PP2 wheels and had a record of them being +24 / +48. The 4.5mm difference makes sense since the PP2 rear tires were 305 and the HP are 315.

Ford Performance PP2 rear 19x11 wheels are +48 also.

Doug

 

[Weeee]

Does anyone have an idea on the offsets of the base Mach 1 wheels?
19 x 9.5
19 x 10

 

[Mikepol2]

Does anyone have an idea on the offsets of the base Mach 1 wheels?
19 x 9.5
19 x 10

+40 front, +52.5 rear

 

[murick]

+45 front, +53 rear

Is it different for 5 spoke wheels and Y-spoke magnetic? My non-HP Euro Mach 1 has +40 front and +52.5 rear written in the tech spec (and has the Y-spoke magnetic.).

 

[Mikepol2]

OK It’s a crappy fall night in Western Pennsylvania but now this is bugging me so I went out to the shed where the winter wheels are stored… Here you go. Sorry for not being tech savvy enough to be able to turn the pics upside down.

 

[Weeee]

Thank you Mikepol2

 

[Vertex]

I know this thread is a bit old but just wanted to say I got curious and walked out to my car to find out what the offset etc for the wheels are for the HP wheels and was able to grab pictures through the spokes and used a flashlight to reflect enough light to take a picture using the selfie camera

HP wheels are as follows
Front 19x10.5J +24mm
Rear 19x11J +52.5mm

Sponsored