2020-2022 GT500 TSB 22-2362 - braking fault messages due to parking brake

[Cobra Jet]

I didn't see this one posted yet, searched the TSB # wide open on this site and had no hits.

Manufacturer Communication Number:

TSB 22-2362

Summary

Some 2020-2022 Mustang Shelby GT500 vehicles may exhibit an intermittent parking brake fault message in the instrument panel cluster (IPC) with diagnostic trouble codes (DTCs) C1034, C2005, C2006, C2007 and/or C2008 stored in the anti-lock brake system (ABS) module and/or a parking brake that sticks after being applied. This may be due to internal binding of the piston within the parking brake caliper. To correct the condition, follow the Service Procedure to replace the parking brake caliper(s).

The above is all I have on TSB 22-2362 (not to be confused with 18-2362, as they are totally different TSB's relating to totally different issues).

If someone has more on this one, please post the info.

Sponsored

 

[HadoDemi]

I have seen this pop up a couple times when trying to set the brake. If I move the car forward or back an inch or two it goes away and sets the brake.
I just assumed a ABS sensor wasn’t lined up just right and didn’t give it much thought.