2019 Mustang spacers with PP1 and magnaride

Discussion in 'Wheels & Tires -- Sponsored by MRR Design' started by marc6795, Feb 10, 2019.

  1. marc6795

    marc6795 New Member

    First Name:
    Marc
    Vehicle(s):
    2019 Mustang GT PP1 convertible
    Joined:
    Feb 10, 2019
    Location:
    Beaumont
    Posts:
    3
    Likes Received:
    0
    0   0   0
    I saw a lot of forums but i'm not sure i saw a solution. Is it possible to add bolt on spacers of 25 mm if i have OEM wheel, PP1 and magnaride without cut studs ? Tks
     
  2. Modulom4

    Modulom4 Member

    First Name:
    Pascal
    Vehicle(s):
    Mustang GT 2018
    Joined:
    Oct 22, 2018
    Location:
    Montreal, Canada
    Posts:
    6
    Likes Received:
    1
    0   0   0
    yes that's what i have one mine. had to install cause of winter tires rubbing the rims with the Brembo caliper
     
  3. OP
    OP
    marc6795

    marc6795 New Member

    First Name:
    Marc
    Vehicle(s):
    2019 Mustang GT PP1 convertible
    Joined:
    Feb 10, 2019
    Location:
    Beaumont
    Posts:
    3
    Likes Received:
    0
    0   0   0
    What brand did you bought
     
  4. Modulom4

    Modulom4 Member

    First Name:
    Pascal
    Vehicle(s):
    Mustang GT 2018
    Joined:
    Oct 22, 2018
    Location:
    Montreal, Canada
    Posts:
    6
    Likes Received:
    1
    0   0   0
    Eibach
     
    marc6795 likes this.
  5. Modulom4

    Modulom4 Member

    First Name:
    Pascal
    Vehicle(s):
    Mustang GT 2018
    Joined:
    Oct 22, 2018
    Location:
    Montreal, Canada
    Posts:
    6
    Likes Received:
    1
    0   0   0
    Steeda for the front(3/4 inch) and Eibach in the back(1/4 inch) everything was done in a speed shop in Laval.
     
  6. OP
    OP
    marc6795

    marc6795 New Member

    First Name:
    Marc
    Vehicle(s):
    2019 Mustang GT PP1 convertible
    Joined:
    Feb 10, 2019
    Location:
    Beaumont
    Posts:
    3
    Likes Received:
    0
    0   0   0
    Bolt on or sandwich
     
  7. Schooley

    Schooley Well-Known Member

    First Name:
    Brandon
    Vehicle(s):
    2019 NFG Mustang GT
    Joined:
    Dec 4, 2018
    Location:
    League City, TX
    Posts:
    85
    Likes Received:
    70
    0   0   0
    I have the 1” hub centric spacers all around from Coyote, plug and play 97CD0D34-CDFA-4D46-BA79-90781D673431.jpeg 621FAAC9-9ED9-4FDF-AA89-859A998085E0.jpeg
     
  8. 1 old racer

    1 old racer Well-Known Member

    Vehicle(s):
    2018 Royal Crimson GT PP prem.
    Joined:
    Feb 20, 2018
    Location:
    Fontana CA
    Posts:
    269
    Likes Received:
    214
    0   0   0
    #8 1 old racer, Feb 11, 2019
    Last edited: Feb 11, 2019
    I have 23mm on the rears and 25mm on the front on mine with no problems. Note. If you ever take the car to the track the spacer MUST come off.
    20180630_084242.jpg 20180629_181204.jpg
     
  9. Modulom4

    Modulom4 Member

    First Name:
    Pascal
    Vehicle(s):
    Mustang GT 2018
    Joined:
    Oct 22, 2018
    Location:
    Montreal, Canada
    Posts:
    6
    Likes Received:
    1
    0   0   0
    for the front it's bolt on and the back is sandwich.
     
Loading...

Share This Page