2018 with Hellion Sleeper kit at Bowling Green NMRA finals runs [email protected]

[Mike5876]

Hellion loaded up my 2018 with the new Sleeper kit installed and took it to Kentucky to see how it would run.
This is the base kit with the standard turbos. My car has in addition a Fore triple pump fuel system, an Xtreme DI high pressure pump all running on E85. Stock motor, transmission, converter. Ken from Palm Beach Dyno ran the car. First day he ran it with 17" Jms wheels on Mickey Thompson drag radials. Without using the trans brake it ran 9.743@152 mph. Today Ken ran the car with HRE 20" wheels with Mickey Thompson drag radials. Went [email protected]!

Sponsored

 

[turboluke9000]

Seems slow for a 1200 rwhp car

 

[F1scamp]

Lol... 152 mph on a stock motor and transmission. Insane. Congrats!!

 

[Zinc03svt]

Base kit is around 750 whp. Plenty to run those times and trap. ;).

 

[budsell]

Once the 60 comes down it'll really be impressive

 

[2qwk4ya]

Thanks for sharing.
150+ 1/4mi. with just a base Sleeper kit and Fuel system is Badass!
Once that 60' drops that's a low 9sec. car just like it sits.
Its nowhere near 1194rwhp. But you still have one Badass car.

 

[95civic2005]

Wow! Very impressive!

 

[sccapri]

How much psi on those passes?

 

[Mike5876]

How much psi on those passes?

16lbs

 

[arieso94z28]

Thanks for sharing.
150+ 1/4mi. with just a base Sleeper kit and Fuel system is Badass!
Once that 60' drops that's a low 9sec. car just like it sits.
Its nowhere near 1194rwhp. But you still have one Badass car.

I believe it made the 1194rwhp with the top mount kit with Precision BB turbos. They installed the base sleeper kit to show everyone what the base kit is capable of at the track.

 

[scober]

The car was running well this past weekend and good to see KenB tuning/driving.
He mentioned boost referenced cut-outs? Makes a lot of sense but hadn't heard of such things

 

[HELLION TURBO]

The car was running well this past weekend and good to see KenB tuning/driving.
He mentioned boost referenced cut-outs? Makes a lot of sense but hadn't heard of such things

We have an option to install cutouts that will open at 7 psi. We keep the stock exhaust, so its silent for driving... then it goes wide open after
WOT!!! The ultimate sleeper!

 

[scober]

We have an option to install cutouts that will open at 7 psi. We keep the stock exhaust, so its silent for driving... then it goes wide open after
WOT!!! The ultimate sleeper!

VERY SLICK, and agreed the ultimate sleeper!
Congrats to Hellion and Mike Szabo for a killer combo!

 

[Crackerjack17]

Nice. Why do I have a manual again? Lol

 

[Mike5876]

VERY SLICK, and agreed the ultimate sleeper!
Congrats to Hellion and Mike Szabo for a killer combo!

thank you sir!

Sponsored