2018 GT Procharger Stage II

[Chris Barnes]

Since I've been lurking for quite some time and absorbing everyone else's information, I thought I'd finally post my progress. Just finished the Procharger Stage II kit on Saturday. I also installed a UPR oil separator while I was at it. Thanks to Erik at Procharger for all of his advise and wisdom! Going easy on it for now until it goes on the Dyno July 11th to make sure she's safe and happy. Hoping to get an Alky Control system here in time for me to install as well.

Sponsored

 

[Jay-rod427]

Noice

 

[MustangAddict]

Need more pictures... video... details... install yourself?

 

[gimmie11s]

In for results.... nice!!

 

[80FoxCoupe]

OP, what pulley on the head unit?

 

[whatsup62]

Az...i m guessing you are on 91?

 

[GT2]

p1sc or p1x? Looks good

 

[Chris Barnes]

Need more pictures... video... details... install yourself?

Sorry, Yes I did the install myself. Also forgot to say it's a P1X head unit with helical gears, black IC, etc. The goal was to make as stealthy as possible. Install was pretty straight forward, with the exception of installing the crank pulley. Ended up having to basically remove the sway bar to get it fit. No biggie really, but just a step I didn't expect. I'll get some more pic's up later. Thanks for the interest!

 

[Chris Barnes]

Az...i m guessing you are on 91?

Yep, Crappy AZ pump gas. Only a few E85 stations around the entire valley, so It's really not a viable option for me. This is why I'm going to install an Alky Control system next week.

 

[ahl395]

Yep, Crappy AZ pump gas. Only a few E85 stations around the entire valley, so It's really not a viable option for me. This is why I'm going to install an Alky Control system next week.

Nice install!

The Alky system will definitely help you out. I went from 12psi/15-18* timing on 93 to 15psi/21* timing on meth. Significant boost in power. Check my build log if you want for more details on my Alky install (page 9-10). I would recommend mounting the nozzle on the metal pipe right after the intercooler, and you could relocate the IAT sensor to after the nozzle on the same pipe if you wanted to.

 

[Chris Barnes]

Thanks! I've actually been stalking your build and was going to PM you and pick your brain on the Alky Control setup.

 

[ahl395]

Thanks! I've actually been stalking your build and was going to PM you and pick your brain on the Alky Control setup.

Sure thing! I'll keep an eye out for it.

 

[Chris Barnes]

OP, what pulley on the head unit?

4.75"

 

[Rodsaleen]

Nice!! You’re going to love it. I have the HO kit with Stg II IC.

 

[Chris Barnes]

Nice!! You’re going to love it. I have the HO kit with Stg II IC.

In hind sight I probably would have done the HO with the upgraded intercooler. The dedicated belt definitely makes the install a bit more complex. Plus I don't ever plan on upping the boost, so the shared drive would be more than sufficient. Glad to see I'm not the only one that went this crazy on a brand new car!

Sponsored