2016 mustang gt 80mm single turbo build with rear mount radiator

[Slaughter5.0]

That pull was for a data log from 2500 rpm to 7000

Sponsored

 

[Slaughter5.0]

I’ll post another video later with a 2-3 gear pull from 3500 rpm

 

[windsor]

Without going back through the thread, what size turbo?

Not trying to be too obvious, but it says 80mm right in the thread title (unless he upgraded since then)

 

[Slaughter5.0]

Epic build man!

The 2nd gear roll seems very laggy.. can you get any of that tuned out or is that just how it is? Who is tuning it?

Without going back through the thread, what size turbo?

It’s a 80mm, and that pull was for a data log , from 2500 rpm to 7000 , starting at full throttle at 2500rpm , I’ll post another video of it from 2nd -3trd gear pull from 3500 rpm it’s much more violent

 

[gimmie11s]

Not trying to be too obvious, but it says 80mm right in the thread title (unless he upgraded since then)

lmao.. yes, im a dumbass.

So that is the spec on the compressor. OP, what is spec on the turbine and what housing size on the hot side?

 

[gimmie11s]

It’s a 80mm, and that pull was for a data log , from 2500 rpm to 7000 , starting at full throttle at 2500rpm , I’ll post another video of it from 2nd -3trd gear pull from 3500 rpm it’s much more violent

Nice.. I have twin 67's on my car and it sees full boost around 4200 rpm.... maybe a hair later.

 

[ihasnostang]

rear mount rad is the most interesting part of this to me

Sponsored