Steve@CJPP
Well-Known Member
- Joined
- Nov 15, 2012
- Threads
- 147
- Messages
- 305
- Reaction score
- 98
- Location
- Harrisburg, PA
- Website
- www.cjponyparts.com
- Vehicle(s)
- 2016 Comp Orange GT Prem PP
- Thread starter
- #1
[ame]
In this video we show you how to install Barton Industries' short throw shifter for all 2015 V6 and EcoBoost Mustangs with a manual transmission, using our EcoBoost project car. Ford continued the use of their successful MT82 transmission on the 2015s, as good as this transmission is, the throws tend to be a little sloppy. Barton had a great shifter for the previous models, so we couldn't wait to put one in our '15.
With a total redesign in 2015 for the Mustang, Barton Industries had to step up and totally redesign their Short Throw Shifter that has been so popular in the previous generation. The new shifter is machined from 303 Stainless Steel and 6061T6 Billet Aluminum. And will ship with all necessary hardware and sound insulation to complete the installation.
Installation is a little more complex than the pervious models, but can be done in about 2 hours. Once installed, you will feel the difference immediately, shifts are smooth and clean. If you want to get the most out of your manual transmission, than this short throw shifter from Barton is a must have.
Please Note: Your shift knob will need to screw on 6 turns for proper function of reverse lock-out. Repeated removal of factory shift knob may warrant the need to use Loctite to keep securely in the proper location.
For more information on this kit check this LINK
In this video we show you how to install Barton Industries' short throw shifter for all 2015 V6 and EcoBoost Mustangs with a manual transmission, using our EcoBoost project car. Ford continued the use of their successful MT82 transmission on the 2015s, as good as this transmission is, the throws tend to be a little sloppy. Barton had a great shifter for the previous models, so we couldn't wait to put one in our '15.
With a total redesign in 2015 for the Mustang, Barton Industries had to step up and totally redesign their Short Throw Shifter that has been so popular in the previous generation. The new shifter is machined from 303 Stainless Steel and 6061T6 Billet Aluminum. And will ship with all necessary hardware and sound insulation to complete the installation.
Installation is a little more complex than the pervious models, but can be done in about 2 hours. Once installed, you will feel the difference immediately, shifts are smooth and clean. If you want to get the most out of your manual transmission, than this short throw shifter from Barton is a must have.
Please Note: Your shift knob will need to screw on 6 turns for proper function of reverse lock-out. Repeated removal of factory shift knob may warrant the need to use Loctite to keep securely in the proper location.
For more information on this kit check this LINK
Sponsored
Last edited:
