18 GT A10 Procharger 4.25in pulley

[Chris Barnes]

My 2018 stage II P1X kit came with a 4.75 pulley and a K080660 belt. I see 8.5-9 psi. Depending on your fuel, you may octane limited at that boost level like I was before switching to a methanol system. Good luck.

Sponsored

 

[Brandon91]

My 2018 stage II P1X kit came with a 4.75 pulley and a K080660 belt. I see 8.5-9 psi. Depending on your fuel, you may octane limited at that boost level like I was before switching to a methanol system. Good luck.

Are you using a BAP? I’ll order a 4.75 just in case the 4.5 I ordered is to much for 93. I just picked up the same belt today just in case the K080655 is to small.

 

[Chris Barnes]

Yes, I'm using a JMS BAP.

 

[LSchicago]

Maybe yes. Id work my way to that pulley not start with it.

I have to switch to a 4.50 pulley to get the 93 base tune before Lund will tune for E85.

 

[LSchicago]

Are you using a BAP? I’ll order a 4.75 just in case the 4.5 I ordered is to much for 93. I just picked up the same belt today just in case the K080655 is to small.

My car tuned very well on a 4.5" pulley (P1X) and 93 Octane.

 

[Brandon91]

My car tuned very well on a 4.5" pulley (P1X) and 93 Octane.

I’m on a 4.5 now, 93 and running 8 ounces of boostane. I also just installed a MAK intake as well. The car is a blast!

I’m waiting on headers and opg’s now.

 

[LSchicago]

I’m on a 4.5 now, 93 and running 8 ounces of boostane. I also just installed a MAK intake as well. The car is a blast!

I’m waiting on headers and opg’s now.

Now tuned on E85. This thing screams. Soon going to 4.25" Griptech.

 

[schmeky]

Brandon91,

I'm on the 4.75 pulley, 93 octane, and 1/2 ounce Boostane per gallon for an adjusted 99 octane. Mine rips.

 

[Brandon91]

Now tuned on E85. This thing screams. Soon going to 4.25" Griptech.

I’m definitely going E85 later this year.

Brandon91,

I'm on the 4.75 pulley, 93 octane, and 1/2 ounce Boostane per gallon for an adjusted 99 octane. Mine rips.

I always fill up at a 1/4 of a tank or at least try lol. Typically it’s about 13 gallons. I plan on running e85 eventually, probably when I switch tuners….

Having owned all 3 types of forced induction this is my favorite.

 

[TKM Conbread]

Im running a D1x with 4” pulley stock motor 2020… Made 873 on 93 with some additive…. Makes 18psi…. now on e85 tune prob makes in the 930-950 range…..

but she took out the A10 only 7000 miles on the car..

 

[silverbullet85]

Im running a D1x with 4” pulley stock motor 2020… Made 873 on 93 with some additive…. Makes 18psi…. now on e85 tune prob makes in the 930-950 range…..

but she took out the A10 only 7000 miles on the car..

Yeah a 1000 hp will do that

 

[TKM Conbread]

Yeah a 1000 hp will do that

I hope the new clutches hold up better!!! Havent even taken it to the track yet..

 

[SJ-KY]

Im running a D1x with 4” pulley stock motor 2020… Made 873 on 93 with some additive…. Makes 18psi…. now on e85 tune prob makes in the 930-950 range…..

but she took out the A10 only 7000 miles on the car..

You running a crank brace/support on that set up? I assume it’s a stage 2 8rib?

 

[TKM Conbread]

You running a crank brace/support on that set up? I assume it’s a stage 2 8rib?

yes i run a crank support, crank Stud, and its 8rib deal

 

[Drpaul09]

I run a 4.5 and make 680 rear wheel... car has run 10.20 at 138.8. Lund doesn’t recommend any more pulley than that on my car with pump gas. Next time to track I may drop to a 4.38 and dump 5 gallons of ms 109 in the tank. Also my kit shipped with the 4.5 pulley

hi gregory347. Was 680 rwhp on 93?

Sponsored