Sponsored

'16 GT, sleeved Predator and F1A94

OP
OP
80FoxCoupe

80FoxCoupe

Well-Known Member
Joined
Mar 28, 2018
Threads
47
Messages
4,352
Reaction score
4,281
Location
Cincy, OH
Vehicle(s)
16 GT, 80 Fox
Also bought comp stg2 blower cams for hopes of a little bump in power when maxing out this P1X. Any thoughts on possible horsepower gain?
man i sure dont. I changed so many things at one time. Id like to think 35ish whp if everything is the same. Keep in mind while not a huge gain, its a cumulative effort. Do a handful of things that are of small benefit, and it will all add up!
Sponsored

 

sloride

Well-Known Member
Joined
May 20, 2017
Threads
9
Messages
207
Reaction score
66
Location
ohio
Vehicle(s)
2016 GT
man i sure dont. I changed so many things at one time. Id like to think 35ish whp if everything is the same. Keep in mind while not a huge gain, its a cumulative effort. Do a handful of things that are of small benefit, and it will all add up!
Sounds good enough to me. When all is said and done may try and rent a dyno for a couple hours. To try and categorize swinging the cams and it’s affects
 

Sponsored

turnswrench

turnswrench
Joined
Apr 2, 2018
Threads
43
Messages
1,940
Reaction score
1,441
Location
MN
First Name
Bowman
Vehicle(s)
F-150, WK SRT
This thread needs an update.
 
OP
OP
80FoxCoupe

80FoxCoupe

Well-Known Member
Joined
Mar 28, 2018
Threads
47
Messages
4,352
Reaction score
4,281
Location
Cincy, OH
Vehicle(s)
16 GT, 80 Fox
80FoxCoupe - Any news on the weather? Have you had the car out ?
Weather is good. Putting in new trans, carbon drive shaft, PP rad, large trans cooler etc in now. Updates shortly!!!
 

Sponsored
OP
OP
80FoxCoupe

80FoxCoupe

Well-Known Member
Joined
Mar 28, 2018
Threads
47
Messages
4,352
Reaction score
4,281
Location
Cincy, OH
Vehicle(s)
16 GT, 80 Fox
Ok folks, back in the game. Drivetrain carnage ripped the ebrake cable bracket off of the transmission tunnel and broke all 3 cables. The front cable is not available separately, so i had to purchase the ebrake handle assy. Beat tunnel back into shape and welded on bracket. Also swapped to some stiffer rear springs. Big thanks to @LevittownFordParts for the replacement parts! Also going through the. For parts for the new project, 80 coupe / gen2 / TKX... More on that later.

PXL_20210516_175731391.jpg


PXL_20210515_225740989.jpg


PXL_20210517_011620137.jpg
 
OP
OP
80FoxCoupe

80FoxCoupe

Well-Known Member
Joined
Mar 28, 2018
Threads
47
Messages
4,352
Reaction score
4,281
Location
Cincy, OH
Vehicle(s)
16 GT, 80 Fox
One ebay console later and interior is back together. Did a basic 6r80 build with billet planetary, intermediate shaft, exedy clutches and thermostatic bypass. Also installed a PP rad and larger trans cooler. Circle D freshened up the converter and running a Qa1 carbon shaft.

PXL_20210518_035306255.jpg


PXL_20210517_011635270.jpg


PXL_20210519_000943660.jpg


PXL_20210519_200332019.jpg


PXL_20210324_215234889.jpg
 
OP
OP
80FoxCoupe

80FoxCoupe

Well-Known Member
Joined
Mar 28, 2018
Threads
47
Messages
4,352
Reaction score
4,281
Location
Cincy, OH
Vehicle(s)
16 GT, 80 Fox
Center section of the MBRP exhaust was destroyed. Sourced this section from MBRP and rebuilt the front portion to mate up to the ARH header's. Since my aluminum housing 373 diff was destroyed, ive replaced it with an iron housing 355. Back in action!!! First time ive really driven it since it made 1275whp with the f1a94, shits fast....

PXL_20210520_033837295.jpg


PXL_20210521_002144002.jpg
 
 




Top